savage x 4.6

  1. I

    Half Tank Lean | Tank mod question.

    Hello, I'm aware of the half tank lean that plagues savages and the best solution would be a mid-tank mod. But the issue lies with many of the parts required for mid tank mod are not available anymore except the chassis and stuff and setting it up right now is a tad bit expensive. The Ofna...
    • Imran
    • Thread
    • lean savage savage x 4.6
    • Replies: 7
    • Forum: HPI Savage
  2. RedRocket69

    Engine won't start

    Hey, so I'm new to the hobby! Bought a second hand hpi x 4.6 savage off Craigslist. Said it worked, got it and it didn't start. Took it to a hobby shop after losing patience after hours of trying to start it and it just needed a new glow plug. Worked good for about 3 weeks. Now I took it through...
  3. I

    Carbon parts.

    Hey, I'm aware PRC has been out of business for long. But I was wondering if I were to try and get me some USED carbon parts for my Savage, where would the best place be? Does anyone here know anyone who may want to sell their old carbon fiber set-up? Well, I'm not sure how popular carbon...
    • Imran
    • Thread
    • carbon fiber hpi parts savage savage x savage x 4.6 savage xl
    • Replies: 0
    • Forum: HPI Savage
  4. N

    Upgraded gears for savage x 4.6

    Whats my best option for upgraded steel gears. Also what gearing should i use. I appreciate the help
  5. I

    Savage XL parts and X 4.6 parts.

    Hey, I had a question, if I'd like to change the rear suspension arms of a savage x 4.6 to those of an XL, will they fit? And are the length of the dogbones the same? What are the things I might have to change/add to fit them? What are the pros and cons? Thank you
    • Imran
    • Thread
    • savage savage x 4.6 savage xl
    • Replies: 23
    • Forum: HPI Savage
  6. I

    New to hobby. Need tips.

    Hello everyone, I'm the new guy here. I bought myself a used Savage x 4.6 nitro. Its my first nitro and I have learned a great deal about nitros in the meantime after getting my hands on it. Since this is not a popular hobby around here (United Arab Emirates) I don't really have much support...
    • Imran
    • Thread
    • nitro savage x 4.6
    • Replies: 16
    • Forum: HPI Savage
  7. H

    savage x 3 speed conversion help!

    hello bashers and thrashers. relatively new to the rc car scene, I bought my first nitro, a RTR savage x 4.6 bigblock. I have purchased a new 3 speed conversion kit and went about dismantling for the conversion, only to find that the spacer that sits between the c clip and the smallest of the 3...
  8. ChrisLizar

    hpi savage 4.6x with lrp ZR .32 engine

    HELLO ALL, I RECENTLY PURCHASED A LRP ZR .32 ENGINE, I TRANSFERRED THE CLUTCH BELL,CLUTCH SHOES, FLY WHEEL AND ENGINE MOUNT FROM MY SAVAGE TO THE NEW ENGINE. THE ISSUE IN HAVING IS THAT THE SERVO THROTTLE LINKAGE USED TO CONNECT EASILY TO MY CARB. NOW THE CARB( LITTLE NIPPLE MAY I CALL IT) THAT...
  9. blueovalcraig

    My three toys

    had the three sitting together so thought I'd take a quick pic. Excuse the mess
  10. F

    I need help, can't get Savage 4.6 started

    So, I have recently pulled my 4.6 Big Block Savage out for summer this year because I was determined to get it running. 3 hours in, still absolutely nothing. I have gotten new batteries for igniter, 2 fresh plugs that smoke for a split second when connected to igniter and some fresh fuel. I...
  11. Nihal

    Screw set for Savage X 4.6

    Planning to change the screws on my truck and heard about Tony Screws. Is this a good set or do you have any other recommendation. http://www.amainhobbies.com/rc-cars-trucks/tonys-screws-hpi-savage-x-screw-kit-tsk-savagex/p6999
    • Nihal
    • Thread
    • savage x 4.6 screw kit
    • Replies: 8
    • Forum: HPI Savage
  12. Nihal

    LiPo For Savage X 4.6

    Guys Am getting my new high voltage servos today and will be upgrading my current stock servo. I do have a question, i heard that the LiPo 7.4v pack will be a problem to the stock receiver. Is this true?
    • Nihal
    • Thread
    • batteries lipo receiver savage x 4.6
    • Replies: 7
    • Forum: Electronics
  13. T

    Brand New Savage x 4.6 wont start

    I currently have a savage x 4.6. It is brand new, I cant get the motor to start for the life of me. I have taken the glow plug out and tried to start it to see if my pistons are moving up and down and they are, I have tested my glow plug to make sure its good and it is. I am so close to just...
  14. Nihal

    What a day!!!!!

    I did my first start on my savage x 4.6!!! Feeling was good. As this is my first tank I let the engine run. Then after about mid tank the engine got cut off…No idea why!! Start again and it was going fine till I begin to hear the engine ref up. I heard about mid tank lean but I did not hear that...
  15. mw24hr

    HPI Savage X 4.6, I think it's broken

    Hi all, just fitted new clutch wheel with metal gear this time and I have now wrecked something else. Can someone tell me what this is in the pic ?
  16. Juarezd

    New savage x 4.6

    Hey new to the forum so if it's in the wrong area I apologize. I am planning to get a new savage 4.6 pretty soon. This is my first nitro rc car. I live in west Texas so the temps are usually hot and dry. What nitro fuel and blend do ya recommend and what glow plugs? What tools and equipment...
  17. K

    Savage x 4.6 won't move

    my savage x 4.6 won't move jut replaced clutch with aluminum clutch shoes from Hpi also changed clutch will hear to 16t and spur gear to 49t I was using the truck today in the grass and on pavement then all of a sudden it stopped moving but the motor revs up clutch bell and spur are spinning at...
  18. TomzZeH

    Integy Savage Shocks? any good?

    Just Ordered a set of Integy Shocks for my Savage x4.6 Are these any good? anyone got any experience with them...
    • TomzZeH
    • Thread
    • integy savage x 4.6 shocks upgrades
    • Replies: 4
    • Forum: HPI Savage
  19. S

    new savage

    Got my 1st hpi today. Had a old ofna dominator about 9 years ago. Hope this will be a good truck.
  20. blueovalcraig

    What now? Breaking in engine

    Hi folks, Have followed break in procedures according to owners manual for my Savage X 4.6 but I have also watched some you tube videos and read other guys opinions on here. Basically I have ran it for two tanks at idle and two tanks at no more than 1/2 throttle as per instruction book. Is...
Back
Top