Search results

  1. P

    hpi baja axles on a flux...

    hello i wondered if somebody has allready done that? i'm trying to do it but if somebody tried it allready plz let me know. the first problem was to find bearings that would fit, standard bearing size is 8x16x5. Baja axles are 12mm and flux are 8mm so i would need 12x16x5 bearings so...
  2. P

    neu 1717 heli engine hole problem

    i just recieved my new motor to fit my 5B conversion but since it's a heli version it has holes on both sides... i could buy it cheap so thats why its a heli version :) the front is allready fixed with a plexi coverplate on top of the other one but the rear... would it be safe to...
  3. P

    My Savage 5B conversion by Alza Racing.

    :stupidcoffee: it all began with that and a fast clicking finger on the internet to order lol :) Since i saw a friend of mine drive his baja i wanted something big too but i don't like the sound of gas/nitro engines anymore so i started looking for a conversion. I knew the tcs conversion...
  4. P

    Savage 5B conversion by alza racing

    I tested my Alza Racing 5B conversion a few days ago and made a small clip. No bashing, to scared to brake anything yet in this stadium...:) G9XiwR-zeu0 note: only had 1 LiPo that wasn't fully charged lol so this monster will be more aggressive in the future ;)
  5. P

    LiPo's for my savage 5b conversion

    hello i just converted my savage into a 5b and i'm looking for some new LiPo's. i'm running it with my standard flux motor and esc and a 18/44 gearing and big joes (i just cant stay away from them lolz) I think of buying 2 or 3 5000mah 6 cells packs, 6 cells because it's an easy fit...
  6. P

    CVD's for Flux?

    hello, i think alot of you might have the same problem as i do and that is when you get full throw in your steering the dogbones tend to pop out or suddenly stop the car when turning because of that. Now are there any good solutions without loosing the full throw of your steering? i have put...
  7. P

    Desertboy 17 rebuild

    hello peepz, some people might remember my black beast that i customized a bit myself, some pics below to show what i'm talking about ;) it had the servo and the esc mounted on the side :) some vids: http://www.youtube.com/watch?v=oaPKp4xQ_Zc...
  8. P

    decent exhaust for my .28 engine and exhaust/tank problem

    hello, i'm looking for a decent exhaust for my axial .28 engine but don't know what to buy since i'm pretty new at the nitro thing... have 2 Fluxes but this is quite different hehehe :) I hear alot of people saying the dynamite 086 is a very good choice, any other suggestions or should i...
  9. P

    LiPo's in hpi rotostart?

    hello, i was wondering if you could use 8.4v LiPo's in the hpi rotostart? i know its normally 7.2 volt but would that harm the device itself and is anyone using this coz i have some lipos i don't use anymore... just adding some tamiya connectors and i would ready to go, would be a cheap...
  10. P

    My nitro spur gears in my flux?

    hello, i'm rebuilding my nitro into Flux so i have the tranny rebuild to be Flux proof but i still have some spurgears laying around from my nitro so i hope i can still use them? The spur gears are much broader? (lol) than the flux spurs, they are 2 Robinson racings 48teeth's and i would use...
  11. P

    HITEC HS-805MG problem?

    I recently installed this big scale servo in my flux (HITEC HS-805MG) but i noticed that it became pretty warm after just turning left/right/left/right and adjusting it and when you let the steering wheel go it turns back to starting position reall....slooowww....turning left and right goes just...
  12. P

    weird diff problem?!?!

    anyone had this problem before? look at the pics ;) the inside of my diff.... seems the screws fell out??? after some months of driving... this is the result... my pinion and big gear are still in perfect shape coz i immediatly stopped driving when i heard something weird...
  13. P

    Savage nitro transmission in flux?

    hello, i'm rebuilding my old nitro Savage into a brushless version so i got 2 transmissions left of my nitro, a 2 and 3 speed, can i use them or is it a big or small no no??? :) if i loose the reverse it aint a disaster as longs as it will run forward perfectly i'm happy with it. thanx in...
  14. P

    esc and motor combo help wanted.

    hello i want to convert my old nitro Savage but i don't know what motor i shoud get and what esc... i know you have the mamba monster esc and motor and other popular brands but i don't want to spend that much money on a second brushless savage i just want to have a decent replacement in case i...
  15. P

    some vids of my Flux XL

    FLM xl chassis big joe tires :-) http://www.youtube.com/watch?v=j2r--sGiyEY http://www.youtube.com/watch?v=eg1SIAzOmuw and in the woods http://www.youtube.com/watch?v=YkHTu52qztU all comments are welcome! cheerz P
  16. P

    My desertoby 17 conversion "black beast" :)

    I recently ordered a Desertboy 17 conversion from GCM making my Flux almost 1/6 th scale here's my build in pics and some comments: --> 1st i widened the axles with the integy XL hub carriers en XL x wide axles. then the chassis desertboy 17 conversion chassis made by gcm...
  17. P

    FIBREGLASS Savage Bodies info topic.

    hey bro, we have rules here for selling, becoming a vendor, and making links to your e-bay auctions. If your interested in any of this, then please read the rules in the for sale section. if your interested in becoming a vendor, then please contact admin. thank you frddyj
Back
Top