esc

  1. G

    Esc problems

    Hi guys I'm hoping you can help me I'm having problems with savage flux hp it seem to be running backwards in reverse it's at full speed and when you go forwards it's in reverse mode I've tried a few things and just can't seem to get my head around it pls help me out ppl my son is going crazy
  2. xtremsavage

    Tekin ESC & motor combo

    Been out the game for awhile and slowly startin to get back in. I wanna change out the ESC & motor in my savage xs for a Tekin, but don't know what to get. I wanna switch to Tekin cuz their ESCs can be programmed via bluetooth from a smartphone. Or the latest and greatest transmitter from...
  3. orzowei69

    Vapor pro esc broken

    Today I discovered that my second vapor pro esc has also failed. The first one (came with the savage xs) smoked due to bad thermal contact between the mosfets and the heatsink. There was over half milimeter of resin in between. The second one has just stopped working. Leds blink correctly when...
  4. JonnyWalker

    Truck upgrade as ESC died, Advice wanted. (used Savage Flux XL)

    Hey guys, as you've already read my ESC has died causing me to do some upgrades I've wanting to do for a while. I think the Tork motor is okay so I've been looking at the Hobbywing MAX6 but here's where the upgrades come in, I'm going to be getting the: ALZA kit 5mm XL TVP's Center Differential...
  5. W

    Hi, looking for Savage Flux ESC mount

    Hi all I'm new to this site, so first of all I would like to just say a quick hi to you all I am rebuilding a Savage Flux HP ( I think that is the model anyway) I'm looking for a ESC mount / plate but I keep hitting dead ends can anyone help me find one please Cheers all.
  6. R

    HPI E-Savage truck 309 GT speed controller

    Hi can anyone help me, can I use LiPo battery's with this speed controller?
  7. Fiend

    Reversing slightly wonky?

    My Savage is always reversing wonky. I've trimmed the steering so it goes almost straight forwards (subject to, errr, user error), but on reversing it always steers to one side (right, looking forwards along the car). The rear wheels are slightly toed in (and thus toed OUT as the car reverses)...
  8. Wilson

    Esc relocation

    I been researching some about trying to relocate my esc and wanted to get you guys thoughts on it. Basically I think I'm going to try to relocate it in between the tvps. The problem I'm having is trying to figure out what kind of bracket I need to make or buy. I know some aftermarket extended...
  9. JayOhh

    Is my ESC a gonner?

    So suddenly while doing some hard bashing and hillclimbing (on 4s) my Flux XL wouldn´t go anymore. Steering worked fine but only cogging and strange noises while giving it gas. I changed the batteries but still the same. I think I saw some smoke and it smelled somewhat burned, but nothing bad...
  10. hpicelery

    Weird behavior from a Mamba Monster 2

    I have been running my Savage truck equipped with a Mamba Monster 2 ESC and 2200kV motor (purchased as a combo from Tower Hobbies) for about six weeks and have had no problems with the motor or controller until today. Less than 5 minutes into my first pack (4S) the truck suddenly went dead...
  11. sharkattack99

    ESC with No switch

    hello, I'm planning to put my savage flux back together getting some new shoes for her, and a new servo so i have 2 complete trucks a nitro and a flux. before i was sharing parts, shoes i didn't just want some new ones that i have been looking at for a long time (40 series mud slingers on tech...
  12. jaceracer

    101 Question, any danger leaving LiPo connected to ESC?

    I should know this but i'm on the fence with it, if i leave a LiPo battery hooked up to the esc on the truck and the esc has an on/off switch will that still drain the charge of the battery? I remember on one that didn't have and on/off it would, please school me someone thank you.
  13. R

    Electronic Expert Needed Insided of my ESC!!!

    Hi, I have an HPI Blur ESC and somehow the on-off swicth was tangle with a driveshaft and the wires were tear off the ESC board. While trying to solder the wires back in the ESC, I make the problem worse and now I don't have were to solder the negative wire. Look at the picture: And this a...
Back
Top