gofastturnleft
Well-Known Member
- Messages
- 204
- Location
- Benton, AR
- Thread starter
- #91
still waiting for parts on what feels like day 87...rethinking this
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
They DO look good rockout!! Hmmm RSC for me
What mods besides shaving the front knuckles are required for the RSC to do its job(V1)?
https://www.hpisavageforum.com/forums/showpost.php?p=160361&postcount=21
Will it work with LST shocks and IRC X mounts?
So accusing my wife of throwing them away wasnt the best idea...but she did show me where they were....in MY chair!
there was a way to deanodize but i cant remember what it was?
like brake fluid, or something more corrosive? been awhile since i seen that how-to article?
I think easy off oven cleaner de andodizes also.
Don't know exactly what I did wrong but I definitely did something wrong with the install...when I hook up the upper arm assembly and the steering rod on both sides it wont turn? IDK maybe I need to take it apart and start over. It is probably something simple, but I am getting irritated and everything looks right. Normally after the first time I install something and tear it apart I don't have any issues re-installing. Just had to walk away from it today. If anyone has any ideas or suggestions? It wasn't turning very sharp after the first install either but this is zero turn. The only other thing I have done was install bearings to replace the plastic bushings, so I can't imagine what I did there that would make any difference.
i will try to get some pics up. but the steering post turn fine when they arent attatched to the upper arm or steering link...or if just one is attatched. idk
Are you using the plastic stock arms? If so you got the bolt to tight on the crank. Also to make the turn radius work with the RSC you have to modify the plastic crank coming off the servo saver. I have it posted the mod in #189 Joseph Paul build thread of how i did it.
Pics for help would be a plus. But, check the screws that go into the top of the steering post. Sometimes if you tighten them to much, the steering won't move. Happened to me a couple times.
Welcome to HPISavageForum, a friendly forum to discuss the Savage RC Truck.
Your voice is missing! You will need to register to get access to the following site features:We hope to see you as a part of our community soon!