lrp

  1. P

    Hpi savage XL with LRP32 not heating to 200 and cutting out

    i just started the break-in for my LRP ZR32 spec 4 which i fitted in my HPI savage XL. so far, there have only been two problems. firstly, the truck cuts out and stalls if given any significant amount of throttle. any more than maxxed out throttle trim and the engine would sputter and stall...
  2. S

    LRP zr32 spec 4 - Will it run on 20%

    I’m about to break in my new engine, I have a new bottle of 20% nitro but LRP recommend running it on 25% Will I have any issues running on 20%? What glow plug would you recommend?
  3. ImYOUNGagain

    Lrp .32x spec 4...need a pull start or rotostart

    Went off and got one now i cant find a way to start it. Any help is greatly appreciated. Links to anything that will work. A drill a rope around the shaft and pull it....any advice would be greatly appreciated
  4. I

    LRP Z.28R Spec 3.

    Does anyone have an LRP Z.28R laying around thats dead and wanna get rid of it? I am looking for a crankcase since i stipped one of the threads onto which the backplate is mounted. Or can guide me where I can get it? Thanks in advance.
  5. A

    LRP ZR .32 spec 4 pullstart cord

    hi, i broke the pull start cord on my xl with a lrp zr.34 spec 4 engine. how do i fix this? any idea? i am not sure if there is a replacement pullstart cord since i believe lrp already run out business. please let me know. thanks for the help.
  6. A

    HPI Savage XL Engine replacement with LRP ZR .32

    I am replacing my savage 5.9 to LRP ZR .32. Is there anything else that I need to mount the engine? Does it use the same mount and bolts as the 5.9? Any ideas will help as i am already ordered the engine, it will be bummer when it gets here and i found out i can't mount because i needed some...
  7. B

    Lrp .32

    It's here. Lrp .32 spec 4 Ordered from tower hobbies yesterday morning, received it today by the time i got off work . Can't wait to get this in my xl
  8. dealdealerunltd1

    Fresh Pearl 150 Body On The Ol' SS Savage LRP.32... All Brand New Again..

    SAVAGE SS CUSTOM w/ LRP.32 3spd...
  9. Grozier

    How the heck to choose a clutch assembly

    Okay so I have a Savage 25. Just replaced the engine with a LRP.28 spec 3. The clutch shoes are gone and didn't come with a bell housing. So I need advice on which setup to get. 38mm (size that came on it) flywheel, 3 clutch shoes, springs, bearings, bell housing. 52T spur gear is installed so I...
  10. ikesavage

    Lrp .32 spec 2

    I'm ready to break in my new motor and after set back after set back its finally ready to go, after some fresh fuel another glow plug and I bought a new glow igniter with a new battery this motor WILL not start, I get a quick kick over and then nothing. It is primed and the throttle trim is set...
  11. S

    Lrp 32 so

    I got a savage x about 8 months ago and basically dogged it for 6 gallons and motor pretty much trashed. It's all stock except I replaced pipe with dyn 086 and put robinson spur and bell on it. So I ordered the 32 spec 4 and it arrived yesterday. I'm going to throw this thing on and break in...
  12. ChrisLizar

    hpi savage 4.6x with lrp ZR .32 engine

    HELLO ALL, I RECENTLY PURCHASED A LRP ZR .32 ENGINE, I TRANSFERRED THE CLUTCH BELL,CLUTCH SHOES, FLY WHEEL AND ENGINE MOUNT FROM MY SAVAGE TO THE NEW ENGINE. THE ISSUE IN HAVING IS THAT THE SERVO THROTTLE LINKAGE USED TO CONNECT EASILY TO MY CARB. NOW THE CARB( LITTLE NIPPLE MAY I CALL IT) THAT...
  13. olds97_lss

    Got a new engine for my savage, LRP ZR.30

    Well, after fighting and fighting one of my LRP 28S3's, I finally called it quits and ordered a new engine. A little of the history of that is here: https://www.hpisavageforum.com/threads/savage-half-tank-lean.15953/#post-194458 New engines always look nice when you open the box and this one...
  14. Trouble 69carm

    Move get out my way

    get out my way
  15. Djliveasy

    Lrp .32 first start

    Right so fitted my new lrp .32 today come to start it and it's so tight on the pull start, is this right i don't want to pull to hard n do damage, I no they take a lot of running in, I have had it running for a short period but cut out quickly, any advice would be great, thanks Scott
  16. J

    LRP 30 engine

    My Savage XL took a pretty bad crash and landed upside down and the ground smacked my LRP 32 directly which caused the engine case to crack. I'm thinking of buying the LRP 30 to replace my 32 only because it's about $40 cheaper. I like the power of the LRP 32 but I'm trying to budget. Anybody...
Back
Top