Search results

  1. awya14

    Dumb q's about gearing

    so my axial is set up for street..4 shocks(low..1"of clearence) ..lightened up a bit ,road rage tires 3speed..its always had the 16/49..I wanted a bit more top end..so I put the 47spur on ,didnt notice a change.then 14/49 ..I still cant get the top end speed I'm lookin for..I have the gear chart...
  2. awya14

    STS.30 = awsome

    So ,Ive had the motor for a month or so ..3 different pipes .3 speed 15/49 and 2 speed 16/52..all have been alright ..I finally got the STS 0702 pipe on tonight and all I can say is wow! I was really impressed when i got the Vanage carbon fiber ,but It couldnt handle the heat and melted ..then...
  3. awya14

    Got a weird glitch?

    When I start my truck ..warm it up .only the 1st 10mins or so it goes crazy! throttle/brake blips..steerings all over the place..then poof its gone ..I striped down the electrical tested everything..only thing I can see is crystals or receiver..what else is there ?? all my servo's are good /fail...
  4. awya14

    test vid

    just messin with the savy .. http://media.putfile.com/wheel-extension-test
  5. awya14

    Integy 23mm wheel extenders

    not sure what they are gonna do ..but it opens my wheel base up 2+1/2"!! I was told I need to lengthin my wheel base to make it work right ..but I'm testing these 1st ..see how it goes ..anybody out there do this? 2 things I don't like ..1 no wheel nut..2 the pin is held in by a O-ring
  6. awya14

    Jammin pipes??

    So, ive got a "Ths",Ribbed Hpi and my STS 07 is almost here...because I cant wait I'm goin to buy another pipe this morning .I'm sick of tearing gromets..(and the noise) outa the ribbed and the THS is all dinged up..so I was lookin at the Ofna Jammin #1,2,3 $69,$89,$109..(local)I'm sure ebay would...
  7. awya14

    More new..er body's ..

    all though they don't stay new for long..I pulled out a shock on savy #1 ..turned it kinda truggy-ish ..savy #2 is gettin the integy hub extensions..gonna have a wide *** stance,,wont have it ready till next week.. [
  8. awya14

    Just another bash!!

    the putfile takes a while to load .but the quality is much better.. http://media.putfile.com/savage-62 photo bucket http://s137.photobucket.com/albums/q224/awya15/?action=view&current=savy3-1.flv
  9. awya14

    how to keep brake screws in

    My screws keep backin out ..I guess they've taken a beatin..but besides swapin my tranny cases ..is there a stong glue or plastic weld that'll hold em in?? they came right out yesterday and my disc's were flappin in the wind ..I poped out the d'bone and ran the "no brake" system..it wasnt that...
  10. awya14

    Another"new engine" thread!

    so ..I see since my last visit many new engines have been added,well just got mine tonight ..sts .30 ..cheap too!!!!! pulled it apart,checked for shaveings..sealed her up and slapped it in..thats as far as I got.. figure I'm gonna need 5-6 hrs for breakin..and a fresh jug ..so the rtb can set...
  11. awya14

    wheelie

    me on my YZ 250
  12. awya14

    not sure if its a hop up?

    just a late night mangle .. I can afford a wheelie bar .. but bending aluminium with vise grips is much more fun .. I started with the motor guard ..now its just getting silly haven't tested it yet ..but if it holds up I'm maken 1 for #2 shhhh..they're sleeping
  13. awya14

    Best engine thread!!!

    so Ive been searchin and reading , Ive done as much reasearch as I can,fact is everybody thinks differently about different motors and I want the best 1 for my savage so far its a toss up between Ofna .32 $175 shipped cad STS.30 $160 shipped cad Axail .28 $175 cad local I'm seconds from...
  14. awya14

    How to split diffs

    my buddy did it last time..do I pry with a flat driver ..or is there some trick to it .. and does anybody use 50,000 weight. my other sav has it ..seems to work great ..gotta rebuild # 2 and wanna make sure its not gonna gimme any probs down the road
  15. awya14

    my new bodys

    and the Rc solutions rool cage..does it work?? ..not really ..landed hard on the rear and it jammed against the shocks!
  16. awya14

    mounting a new clutch..clearence prob

    cant seem to fit an after market fly wheel and clutch set up on my .21 tried 2 types "hell Fire" and "bling racing" alum 3 shoe clutch bell rubs the spur everything thing done right ..just aint fittin I got so mad tonight I drilled the mounting holes back 3mm to make it fit! know its not...
  17. awya14

    How can I break 6 heavy duty dog bones in 3 weeks?

    Is there something I don't know about hardened dogbones? I'm assuming they are all the same size>123mm but if the newer x-xss where 130mm and I used them would it be the cause to sheer? same spot ..front and rear..sometimes crash related sometime not.. even snapped 2 center bones sure I beat...
  18. awya14

    X tranny in a older .21 ?

    I wanted to buy a 3 speed and have an extra 2 speed ..ebay has a few cheap right now ...will an "X" 2-3 speed fit in my ol savy?
  19. awya14

    47 tooth spur

    bought 1 today ..couldnt get the motor over far enough without drillin the mounting plate..then it rubbed the brake!! I was thinkin about cuttin down a broken mount plate and shiming the motor up..longer bolts , and re-adjust the throttle linkage What other techniques or problem will I face...
  20. awya14

    Axial .28 ..pain in the a$$

    So my buddy buys 1 last Friday. Brake it in Saturday ..no probs .Sunday he tries to start it pulls once ..cord doesnt retract! 1 way seized up..arrg 2 hrs later frees it up and continues to have a good track session. monday I buy 1 for my beast ..during Break it (2-1/2) tanks it stalls .. go...
Back
Top