slipper clutch

[harty1209]

hey guys my slipper clutch is only lasting a short while the nut has been tightened nearly all the way up and is ok for a short while but then begins to slip any surggestions

many thanks harty1209

 

[mikelh]

I keep my slipper clutch tightened all the way with spring fully compressed. It'll still break away and slip if it needs to.

 

[Bauerdog]

If your slipper has spun to much you may need to replace the slipper pad. They get hard and 'glazed'. Run the spring fully compressed, I even add a drop of loc-tite to the lock nut

 

[X]

If you are having an issue with it staying tightened, then it is time for a new lock nut. This is one of the bad things about leaving the slipper anything but locked down. It will constantly back off causing issues.

 

[GoFastt76]

By now you may need a spur gear aswell as a pad!!

 

[NightFlier X4.6]

Go with a Robinson racing spur gear clutch bell set up much better set up