Picco .28 Drag mod

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Just placed a order for some stuff to go with this motor.

1 x Spektrum DX3R DSM2 3CH Surface High Speed Racing Radio (SPM3100) =
1 x Venom EVA Radio Bag (DX3R/S) (VNR2024) =
1 x Ace R/C DS1015 Super Torque Digital Servo (ACE8127) =
1 x Hitec HS-5625MG Digital High Speed Metal Gear Servo (HRC35625S) =
2 x Pro-Line Badlands MT Monster Truck Tire (2) (PRO1132-00) =
2 x OFNA Medium Molded 1/8 Truggy/Maxx Foam Inserts - Yellow (2) (OFN81100) =
1 x OFNA 17mm Half Offset (28mm) Monster Truck White Dish Wheels (4) (OFN86104) =
1 x JR 12" Servo Extension (JSP98030) =
1 x OFNA 086 Polished Off Road Tuned Pipe (OFN10056) =
1 x Fioroni Special Clutch Shim for all Sliding Clutch Systems (3 pcs.) (FIO-OT-FR55) =
 
Just placed a order for some stuff to go with this motor.

1 x Spektrum DX3R DSM2 3CH Surface High Speed Racing Radio (SPM3100) =
1 x Venom EVA Radio Bag (DX3R/S) (VNR2024) =
1 x Ace R/C DS1015 Super Torque Digital Servo (ACE8127) =
1 x Hitec HS-5625MG Digital High Speed Metal Gear Servo (HRC35625S) =
2 x Pro-Line Badlands MT Monster Truck Tire (2) (PRO1132-00) =
2 x OFNA Medium Molded 1/8 Truggy/Maxx Foam Inserts - Yellow (2) (OFN81100) =
1 x OFNA 17mm Half Offset (28mm) Monster Truck White Dish Wheels (4) (OFN86104) =
1 x JR 12" Servo Extension (JSP98030) =
1 x OFNA 086 Polished Off Road Tuned Pipe (OFN10056) =
1 x Fioroni Special Clutch Shim for all Sliding Clutch Systems (3 pcs.) (FIO-OT-FR55) =



money man ...........................
 
Yea and there is still stuff I want to get. I still need big bore shocks.
 
Last edited by a moderator:
Just placed a order for some stuff to go with this motor.

1 x Spektrum DX3R DSM2 3CH Surface High Speed Racing Radio (SPM3100) =
1 x Venom EVA Radio Bag (DX3R/S) (VNR2024) =
1 x Ace R/C DS1015 Super Torque Digital Servo (ACE8127) =
1 x Hitec HS-5625MG Digital High Speed Metal Gear Servo (HRC35625S) =
2 x Pro-Line Badlands MT Monster Truck Tire (2) (PRO1132-00) =
2 x OFNA Medium Molded 1/8 Truggy/Maxx Foam Inserts - Yellow (2) (OFN81100) =
1 x OFNA 17mm Half Offset (28mm) Monster Truck White Dish Wheels (4) (OFN86104) =
1 x JR 12" Servo Extension (JSP98030) =
1 x OFNA 086 Polished Off Road Tuned Pipe (OFN10056) =
1 x Fioroni Special Clutch Shim for all Sliding Clutch Systems (3 pcs.) (FIO-OT-FR55) =


You're going to be in the Dog house my friend..:incoming:
 
Pope, hope the engine does good for you. I think if I ever replace my engine, I am going to get one of these. Purenitro's work is top notch, I have seen it first hand with the Picco Soulja55 had.
 
Just got everything from amain. Now lets hope the motor shows up today or tomorrow.

Picked up a new body last night at the hobby shop and a few mc59 plugs for breakin.
 
I promise you this baby is no shelf queen. Lets hope the motor shows up tomorrow so I can get it broken in by sunday and you will see.
 
Freddy has about as much in that flux of his and he beats it like it owes him money. Oh wait no he doesn't bad example sorry.
 
Freddy has about as much in that flux of his and he beats it like it owes him money. Oh wait no he doesn't bad example sorry.

I think Fred has helped you enough that you should buy him a set of lipos of X mass ! Then look out... but I don't think you want to look likr a noob when I start taping that BL build running... don't call it a Flux now fred is not a rtr noob !
 
I just keep ribbing him because I can't wait to see that thing go. and yours too.

Freddy knows I love him. But I don't know about LiPo's for xmas.
 
look dude.....I had a little over a gal on mine had still had lot's of pinch!!! it don't fo away that easy!! and let me tell you now....it's hard not given her butt a lot of foot .......especially around tank seven.....'cuz she starts to wake up a little.........but really....take it easy. those are baaaaad motors man.....Robin knows his stuff. please be careful with it..........o..........carry a new set of pants and srawers when the day you hit a gallon and start to tune.....you're gonna need em.........
 
What I got in today.
DSCN1205.jpg

DSCN1206.jpg

DSCN1207.jpg

DSCN1208.jpg

DSCN1209.jpg

DSCN1210.jpg

DSCN1211.jpg
 
how you gonna break/run it in? & what pipe?
 
how you gonna break/run it in? & what pipe?

I have a brand new ofna 086 pipe for the time being till Robin starts selling His pipes.

I am going to heat cycle it for break in. From everything I hear I am looking at a gallon of fuel for break in so I bought a new gallon of byron's race as that has more oil in it than the pro-driver I use normaly.
 
pretty sweet. if i had a new mill that that id prolly sleep with it.

have fun. take a vid when its run it.
 

Latest posts

Members online

No members online now.
Back
Top