Search results

  1. A

    help lrp 28 tuneing

    ok i have a lrp 28 spec 3 .it has 3 tanks trur it.it is way to rich.it spits fuel out the pipe.runs like crap.went to factory specs it runs worse.leaned out evrything still spits.i think the fac specs are lsn 2 1/2 out hsn 3 1/1/2 i had the hsn at 1 out still spits and runs like crap.i did a...
  2. A

    need help

    i have a savage i just put a 4 shoe clutch in it.i need a adjustible motor mount that goes front to back and side to side.i need to move the motor forward to line up.i know they make them but who and were do i get it
  3. A

    mid tank

    ok i saw a fuel pump at tower hobbys it is made by perry, it is a inline fuel pump u think this will work instead of a midtank build
  4. A

    help

    i whant to do a mid tank build on my savage x what do i need for parts.
  5. A

    dynimite big red 28

    ok i got a dynimite 28 it has just 2 carb needels. lsn and hsn. i ran this 3 tanks of fuel without touching the needles.it did nice wheelies and all.i know it is still to rich.but it died on my 4th tank half way thru.it is very hard to start.and when i get it going i tap the gas it dies.the...
  6. A

    2 speed adjustment stock setting

    ok i see alot of threads out here that pepole have a shift problem.and cant find the stock shift point.well the hpi manual says the screw should be all the way counter clockwise and flush,then 1/1/2 turns in clockwise. THIS IS WRONG. my truck wont even shift at that setting i was in 2nd all...
  7. A

    fuel tank

    any body no if their is a bigger fuel tank for the savage that goes were the stock one is.i need a tank to hold more fuel but don't whant to move the tank
  8. A

    2 speed

    ok i heard of running Z MAX in your fuel,it bonds to all the metal parts as a after run oil.so you think you can run Z MAX trans fluid in the trans,i no it is suppose to be run dry.but to me all the gears move causeing heat.z max will cool that down good idea or bad.i have been running z max...
  9. A

    big red 28

    anyone ever use the big red 28 is this any good
  10. A

    running rich

    ok I'm stumpped, i got a axial 28rr, with a hpi k4.6 carburator. no matter what i do i run rich.alot i set settings to flush.then i went in 1 turn on each needle.it started to break up like running to lean .so i backed off a tad my temps are 145 i hit the gas it blows alot of smoke then dies.i...
  11. A

    engine temps

    ok i got a repinched axial 28rr from e bay first mistake, it was supose to be repinched by rays in ny with a new con rod anyhow when i got it i started it,it ran,but stalled and raced like crazy then go back to idel.i thought it might just be a tune issue,i went to stock settings,my temps...
  12. A

    cool air intake

    ok i saw on ebay a cool air intake system for a savage it has a tube that comes off the carb and comes out the front shock tower it has a k a n type air filter is this a good idea seeing when u have a body on your not getting that much air flow.if this filter comes out the front it whould...
  13. A

    twin motors

    i have seen pics of a big twin truckzilla,it looks very cool.anyone no were i can get a kit to do this.they no longer make the truckzilla but wow to put to picco 28 on a savage must be very fast
  14. A

    axial 28rr

    ok i have heard that the axial 28 and the hpi k4.6 are basicly the same.the one way beaering is the same i know that,the backplate to.now do u think a axial 28rr sleve and piston will fit the k.4.6.the 28rr comes factory ported,I'm thinking you can make a killer k.4.6 possibly
  15. A

    1 way bad

    ok i got a k4.6 i have replaced the one way bearing 3 times in the past month.i run sidewinder fuel with 12% oil is it possible to much oil.if i clean the owb it will work but slips after my run
  16. A

    4 lippos in a flux?

    ok i saw a video on youtube of a flux with 4 lippos.is this possible,what is the purpose of this,more speed?were whould all 4 lippos fit and hoe do they connect to the esc.
  17. A

    what the flux is going on

    ok my flux pinnion gear grub screw keeps loosing up,i put blue loctite in the hole and on the grub screw threads.let it sit overnight,and made one pass and the gear slid off.can i drill a hole thru the shaft on the motor and use a grub screw with a pin so it wont move?or should i use red loctite.
  18. A

    flux programer

    i have a flux.its geared 47/18, i run two 6000mah 2cell 48s lippos.i have the castle usb program kit.i found a site that says to set the throttle curve in a S pattern.will this give it better response or should i leave the throttle curve stright.how dose the curve work.my punch controll is...
  19. A

    esc meltdown

    ok i have a flux it is 2 months old,i was running 2 42s 5200mah 2 c lipos and the esc caught fire,and melted.now hpi says to run a 48 or higher LiPo.if it was the batteries that caused this shouldnt it have caught fire right away.i ran this everyday for 2 months ,no problems.the batteries are...
  20. A

    tractor trailer body

    ok i found a tractor trailer body that fits the savage.alot of pepole are looking for a tractor trailer body,but proline no longer makes it.the body i found is off a MADBEAST witch is a cheap imatation of a savage.the body is 18 bucks painted,and comes in 5 diffrent flavors.i just got one for...
Back
Top