wheelie

[Oh Gee Jay]

ok this is my 1st r/c so my first tuning. i thinks its tuned good i see smoke runs good temp stays at about 230-250 depends on how hard i drive it but i cant do a WHEELIE lol but my truck is a savage 25 with a K4.6 big block and everything else is pretty much stock

 

[wildchild27]

wat are the gears that you are runnin?

 

[Oh Gee Jay]

I'm not sure what ever is stock on the savage 25 lol i don't really want to count them oh and its the stock transmission too if that matters

 

[Oh Gee Jay]

the bell one is 14 lol and the other one is getting counted

 

[Oh Gee Jay]

and i think the spur gear is 52

 

[hockeyizlife94]

52/14 you should be pulling stumps out, but thats not stock gearing. stock was 15 and 18 for the 25. either way if you have a decent tune you should be pulling wheelies on command with those setups.

 

[Bankrupter]

yea that should flip over b4 you even try

 

[frddyj]

according to the owner's manual if you have a Savage 25 & your gearing is stock, then you have a 49t spur (p. 32) and a 15t cb (p.46)

 

[AllanQ]

Check your slipper and make sure its tightened down. manual says to back off 1/8th or 14 of a turn, but I keep mine tight. Check you clutches and make sure they are not worn and the inside of the clutch bell to see if its glazed over. If the CB has a build up, it can be cleaned with fine sandpaper to scuff it up. You may want to lean the LSN a touch(not too much) to give you a little more punch onthe low end.

 

[f1n3sse]

k4.6 pulls wheelies no prob.

 

[Oh Gee Jay]

yeah i got new pads that go on the back of the spur gear and i thought they gears were stock but i bought it used so i know now. i will try it in the next couple days I'm still waiting for some breaks to come in the mail.
thanks for the help everyone i will post if i get it on 2 wheels

 

[Oh Gee Jay]

well i changed the slipper pad and put it tight and cleaned the clutch bell thing on the inside put a 3 speed now its on the roof all the time lol thanks for the advice guys

 

[88gtanotchback]

good to hear bud. now youll be going through shells like crazy!

 

[Oh Gee Jay]

yeah lots of scratches but as long as the can still pin on the truck i will use them lol