Ben Jaxon
New Member
- Messages
- 1
Picked up a Savage 4.6 today off of craigslist. It has a different motor on it which the owner stated was a .28 motor but was unsure of brand, model, etc.
I noticed he had the HSN turned in quite a bit as it was very noticeable how far below flush it was. The car would start up but would choke out before shifting into second gear. Sometimes when holding the wheels off the ground it would shift all the way up into third before choking out.
Just trying to get an idea of what I should be looking for as the culprit. I tried backing the needles out to flush but couldn't get it to start unless I screwed the HSN several (4-5) clockwise rotations in from flush.
I noticed he had the HSN turned in quite a bit as it was very noticeable how far below flush it was. The car would start up but would choke out before shifting into second gear. Sometimes when holding the wheels off the ground it would shift all the way up into third before choking out.
Just trying to get an idea of what I should be looking for as the culprit. I tried backing the needles out to flush but couldn't get it to start unless I screwed the HSN several (4-5) clockwise rotations in from flush.