parts needed for lrp zr30 pullstart conversion

[wildchild27]

here is the same crank that both the truggy version and pullstart version use.

part number (LRP38575) ZR.30 Crankshaft $75.99

backplate (38557)-(pull start rear parts)

owb (38491)

the lrp zr30x has a 7+1 port sleeve and the lrp zr30 spec2 has a 5+1 port but both use the same crank which means you can use the pull start equipment on the truggy version. but remember the pull start and owb reduces the overall performance of the engine.

here is the link for the parts list for the spec2

http://www.lrp.cc/fileadmin/lrp_anleitungen/anl_25002_ma00191-lrp-zr30-spec2-pullstart-manual-e.pdf

and here is the link for wat both mills use.

http://aedownloads.com/press/in_022309_lrpengines.pdf

 

[Londoner]

You'd also need 38556 (pull starter front parts) the pull starter itself?

 

[frddyj]

• nice thread & info eric +1

 

[Shaun]

yes thanks for taking the time to post the part numbers needed for the conversion, its sure to help a few!! repped ya!!