bifftit
Well-Known Member
- Messages
- 321
- Location
- North dakota
so, i have been away a few years.
Upon return to hobby, i find that Picco engines are no longer produced and parts are not readily available for them. I would like to get a rebuild for the one I own, just so i have one but have not been able to find one.
Anyway, the picco I own is a P3 .28 . blue head with flames etched on the top. it has about 1.5 gal of 30% nitro through it and the pinch is still very tight.
would i be better off taking this engine out of service on the hope that in a few years it will attain "vintage status"
the picco is the very bottom engine
Upon return to hobby, i find that Picco engines are no longer produced and parts are not readily available for them. I would like to get a rebuild for the one I own, just so i have one but have not been able to find one.
Anyway, the picco I own is a P3 .28 . blue head with flames etched on the top. it has about 1.5 gal of 30% nitro through it and the pinch is still very tight.
would i be better off taking this engine out of service on the hope that in a few years it will attain "vintage status"
the picco is the very bottom engine