Air
Member
- Messages
- 40
:resp: OOOOOOO!AAAAAHHH!Look at my shiny Firestorm!I'm waiting for my new engine(OS .18 CV-RX) so I decided I'd strip it down and clean and shine it up.This thing is soooo easy to work on!Remove the upper deck and all the electronics and the fuel tank come up with it!The steering servo is the only thing that is on the main chassis.Remove it yet and you can jump in the shower with it!LOL
I used a wet rag for the body and I used simple-green car wash mixed with water and denatured alcohol to clean the truck itself(including the tires).Then I used tire black to give the tires a shine!Its so shiny I can see myself in it!The Firestorm is totally the sweetest looking ST(stock)!Its also as good as it looks!
Here are some pics of it with the bash tires(MOABS)and the race tires(Stock Ground Asault tires).
You may be wondering why I'm getting a new engine?Its because dad put a hole in it!LOL!Serious!.My engine screws that hold the engine on the chassis where stripped,so we drilled the heads of the screws off(Or,tried to).Two screws came out just fine,but the other two screw heads didn't allow the drill to pierce deep enough.So my me and my dad tried to break the slightly broken screw heads off by prying it against the chassis by pulling up and sideways on the engine.The results??Shown in one of the pics.Instead of breaking the engine mount or the screw heads,the engine itself broke!(mumbling)obstinate screw heads(mumbling)LOL
Its really to bad,because I only put 3 gal. through it and it still had very good compression and kept its tune very good.But after a few hours I was glad that it broke so I can get a new engine right away!LOL
Firestorm race mode
Firestorm bash mode
G3.0 Mishap
I used a wet rag for the body and I used simple-green car wash mixed with water and denatured alcohol to clean the truck itself(including the tires).Then I used tire black to give the tires a shine!Its so shiny I can see myself in it!The Firestorm is totally the sweetest looking ST(stock)!Its also as good as it looks!
Here are some pics of it with the bash tires(MOABS)and the race tires(Stock Ground Asault tires).
You may be wondering why I'm getting a new engine?Its because dad put a hole in it!LOL!Serious!.My engine screws that hold the engine on the chassis where stripped,so we drilled the heads of the screws off(Or,tried to).Two screws came out just fine,but the other two screw heads didn't allow the drill to pierce deep enough.So my me and my dad tried to break the slightly broken screw heads off by prying it against the chassis by pulling up and sideways on the engine.The results??Shown in one of the pics.Instead of breaking the engine mount or the screw heads,the engine itself broke!(mumbling)obstinate screw heads(mumbling)LOL
Its really to bad,because I only put 3 gal. through it and it still had very good compression and kept its tune very good.But after a few hours I was glad that it broke so I can get a new engine right away!LOL
Firestorm race mode
Firestorm bash mode
G3.0 Mishap
Last edited by a moderator: