-
Ask questions. Share your HPI Savage knowledge. Register TODAY!
Hyperion G3 6500 Mah
- Thread starter frddyj
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 3,849
- Location
- Worthington, MN
Man O man very nice and very consistant.
![]-[0pa]0ng](/data/avatars/m/0/4.jpg?1394969779){kind=avatar}
- Messages
- 1,871
- Location
- Texas
Is this your setup? I have the muchmore power supply. Team charger with a sensor
J1A1H
Well-Known Member
- Messages
- 967
SNAP on the batteries... I'm in the process of soldering my connectors...
I heard those chargers come highly recommended. Is a decent charger really worth it? I usually don't need a really fast charge because i just charge the night before. Is it worth me upgrading?
And how much do one of those set you back?
I heard those chargers come highly recommended. Is a decent charger really worth it? I usually don't need a really fast charge because i just charge the night before. Is it worth me upgrading?
And how much do one of those set you back?
- Thread starter
- #6
]-[0pa]0ng;167623 said:
Yeah thats mine & i bought the muchmore p/s on your recommendation :resp:
Oh heeel yeah. i had a hyperion 601 just for my hump & glow ig. this 615i duo net 3 model will "sync" charge & balance the packs & charges up to 15A per side O.O.
this is a matter of personal preference but the hyperion packs can be charged up to 5c but i have 6.5A packs so the fastest charge i can give it is <3c. still kicks butt tho.
you can have this charger for $250.00 shipped these days. Think i paid $130.00 shipped for the p/s. Money well spent imo, I'm very happy with the whole deal.
88gtanotchback
SAVAHOLIC
- Messages
- 1,280
fred do you charge above 1c? sweet set up.
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
How many amps is the powersupply. I am in the market for one for carpet season but need to run 4 chargers on it.
Bankrupter
Well-Known Member
- Messages
- 4,792
I love its out on the porch...
- Thread starter
- #10
p/s is 24A 16V. not sure it has enough jam for 4 chargers. they say it can do 2 chargers or a charger/tire warmer. it has outputs for 2.
yeah. theyre 6.5A packs & 15A max & i do max charge so its just a little over 2c
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
Thanks Freddy. That will pump out enough for the four chargers I need. You have a link?
J1A1H
Well-Known Member
- Messages
- 967
Frdyy, can you clear something up for me...
Considering these are 6500mah packs. Would i charge them at around 6 amps? I am a little unsure, when they say "can be charged at 5c" what amp rating is that considering the specs of this particular battery?
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
5c I don't know of any hobby grade chargers that will do that on a 5000mah pack.
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
Holly cow.
- Thread starter
- #19
yeah well, its either put it out there while the kiddies are away or wait till they go to bed caz they get into everything they can reach.
DragonFireSG
Active Member
- Messages
- 56
I have the same packs and same charger. Tried charging the packs at 13A each with no issues.
Powering the charger with a industrial switching power supply for network devices pushing 24V at 23A.
That PSU will handle two Hyperion 0615 Duo3s with ease.
Look for a HP J4839A if you folk are interested in getting one.
DF
Powering the charger with a industrial switching power supply for network devices pushing 24V at 23A.
That PSU will handle two Hyperion 0615 Duo3s with ease.
Look for a HP J4839A if you folk are interested in getting one.
DF
