HPI-newbie
Member
- Messages
- 18
Hi All. I'm building a new savage X for myself with 4mm thick extended chassis side frames (Fastlane Machines) and a massive Thunder Tiger .70 motor will be fitted (From all the parts that I bought). My question is what size clutch bell should I use since the motor don't rev as high, as say a K5.9 engine.. I do know that the Hot Bodies (Truckzilla) .46 motor use's a 17 tooth bell. Should I go for that (It's already fitted) or a bell with 18 teeth ( The gearbox has to change through the gears like the Octane does)...
Specs for the motor are:
Oh more pics will be coming of the build. A lot are alloy parts (With some plastic too), and a 3-speed gearbox (With reverse, and higher third gear too) ..
Specs for the motor are:
- Displacement: 11.49 cc. / 0.701 cu. in.
- Bore: 25.0 mm. / 0.984 in.
- Stroke: 23.4 mm. / 0.921 in.
- Practical RPM: 2,000 ~ 25,000
- Output: 2.25 BHP / 16,000 RPM
Oh more pics will be coming of the build. A lot are alloy parts (With some plastic too), and a 3-speed gearbox (With reverse, and higher third gear too) ..
Attachments
Last edited: