Help needed to identify a carb.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Sandscorcher

New Member
Messages
4
Hi there,

Help needed to identify a carb that came off a savage 25 (or at least i think i'm correct in remembering it as a 25)

After an engine swop i did last year for a neighbor on his savage, i ended up with a carb i don't need.
The thing was he wanted his original carb to be used as the carb on the replacement engine looked different and had a M on the front.

Here's a couple of pic's of the carb in question !
DSC03093.jpg

DSC03094.jpg


Thanks in advance to anyone who can help with some info.

Brucie
 
I agree with AllanQ on this one, it looks to be a for a Mach motor from Dynamite..

Just my .02 according to your pictures and the links that Allan posted
 

allan is right. i used to have the dynamite mach .26, except the throttle barrel boot was blue. here is the instructions that i always reffered to

manual
http://www.dynamiterc.com/ProdInfo/Files/dyn0885-manual.pdf

explosion
http://www.dynamiterc.com/ProdInfo/Files/dyn0887-explosion.pdf
 
With AllanQ on thsi one, This carb is definitely from the Mach M26 or similar. Like said above mine has a blue boot but is the same carb. Sorry for the dirty pict I just wanted to get it posted and didn't have time to clean the whole buggy. Here is a picture of the carb installed om motor.
RS011.jpg


Also just of motor taken with my cell when I got the buggy and assembled it.
Motor.jpg
 
Last edited by a moderator:
Thanks very much for all the advice.

:resp: to all that helped.

Its great to see you can still get help in this god for saken world.


Kindest Regards,
Sandscorcher.
 

Latest posts

Members online

No members online now.
Back
Top