Help needed to identify a carb.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Sandscorcher

New Member
Messages
4
Hi there,

Help needed to identify a carb that came off a savage 25 (or at least i think i'm correct in remembering it as a 25)

After an engine swop i did last year for a neighbor on his savage, i ended up with a carb i don't need.
The thing was he wanted his original carb to be used as the carb on the replacement engine looked different and had a M on the front.

Here's a couple of pic's of the carb in question !
DSC03093.jpg

DSC03094.jpg


Thanks in advance to anyone who can help with some info.

Brucie
 
I agree with AllanQ on this one, it looks to be a for a Mach motor from Dynamite..

Just my .02 according to your pictures and the links that Allan posted
 

allan is right. i used to have the dynamite mach .26, except the throttle barrel boot was blue. here is the instructions that i always reffered to

manual
http://www.dynamiterc.com/ProdInfo/Files/dyn0885-manual.pdf

explosion
http://www.dynamiterc.com/ProdInfo/Files/dyn0887-explosion.pdf
 
With AllanQ on thsi one, This carb is definitely from the Mach M26 or similar. Like said above mine has a blue boot but is the same carb. Sorry for the dirty pict I just wanted to get it posted and didn't have time to clean the whole buggy. Here is a picture of the carb installed om motor.
RS011.jpg


Also just of motor taken with my cell when I got the buggy and assembled it.
Motor.jpg
 
Last edited by a moderator:
Thanks very much for all the advice.

:resp: to all that helped.

Its great to see you can still get help in this god for saken world.


Kindest Regards,
Sandscorcher.
 

Latest posts

Members online

Back
Top