Head gasket?

[THE PIPER]

Hey guys, I just noticed that I'm missing the two head gaskets for my Axial 32 how bad is it to run it till I get a new set? should I wait? Cheers:cheers:

 

[Larsenracing]

Do you have any of them. You can just run one on the Axial motors. I run the thin one on both of my axles as I have removed the thick ones.

 

[THE PIPER]

Do you have any of them. You can just run one on the Axial motors. I run the thin one on both of my axles as I have removed the thick ones.

Hey buddy, I like the Avatar picture u have there. As for the gasket I lost both I'm not sure how but there gone.:cheers:

 

[Larsenracing]

O man that stinks bud. You will have to order more. I'm not sure if the motor can handle it with out any shims. You can put it back together with out them and roll it over by hand using the flywheel and making sure that there is no interference. Take out the glow plug before doing so, so you can get a better feel for it.

 

[Jeremy]

Are you shure you lost them ? they could be stuck to the head button

 

[Grumpy1822]

Your owners manual for the engine should tell you how many shims to run with what percentage nitro. The higher the nitro content, the more shims needed.

 

[Blazer X]

Are you shure you lost them ? they could be stuck to the head button

Ditto on this post.