Demonimp
Member
- Messages
- 9
Hi guys I have just started to put together my conversion after what seems like an eternity of waiting for parts I have the flux motor mount and plate. the issue I'm having is the spur (47t) and pinion 18t.
Now the motor mount wont move far enough over to the right looking from the rear of the truck to be able to fit the pinion in place after reading through many posts on the conversions I have yet to come across this.
The only remedy I can think of is to get a smaller pinion but I'm a little reluctant to do this. I will post some pics tomorrow as it's too late here in the UK to be messing about in my workshop. Can anyone help with a cure many thanks in advance.
Now the motor mount wont move far enough over to the right looking from the rear of the truck to be able to fit the pinion in place after reading through many posts on the conversions I have yet to come across this.
The only remedy I can think of is to get a smaller pinion but I'm a little reluctant to do this. I will post some pics tomorrow as it's too late here in the UK to be messing about in my workshop. Can anyone help with a cure many thanks in advance.