Team Losi servo arm

[Dreadnaught]

alright, i bought a new servo arm from the new (crappy) hobby shop. its a LOSA99030, and i cant find a dang screw to fit into it for connecting the steering bell crank arm to.

please help.
thanks in advance,

Kyle.

 

[Dreadnaught]

bumpity bump

 

[RangerRock]

Drum with the aluminum servo horns I have used in the past I have always drilled a bigger hole for it where it barely fits then put a nut on the other side to hold it on....just me though, only used a metal one once though

 

[xtremsavage]

Dread, I've done the same thing as Parker mentioned and haven't had any problems. I've done it to an alum. servo arm and a plastic servo arm once. And both worked great. Hope this helps too.

 

[Dreadnaught]

alrighty, guess its a trip to the hardware store. thanks for your help parker, and xtrem!

 

[xtremsavage]

alrighty, guess its a trip to the hardware store. thanks for your help parker, and xtrem!

Dread, before you do that, look and see if you have some extra 3mm x 15mm screws layin around along with a 3mmm nut. I'm sure you already have a 1/8th in. drill bit. That's all you need to make it work. A 3mm screw will fit snuggly in a 1/8th in. drilled hole. That way you don't have to much access play.

 

[Dreadnaught]

i have the bit in my dremel, and i have the remains of a SMF screw kit. ill see what i can do. thanks xtrem!

 

[xtremsavage]

no problem. just tryin to same you some more down time.

 

[Dreadnaught]

we got too much snow last night to run it in....its too powdery. don't feel like frying another servo.