Steering servo wheel problem Upgrade?

[Habiak]

The white thin plastic wheel on the steering servo have broke for the second time, i've replaced it alrady but is there any better upgrades for this?

 

[J.LO's SAVAGE X]

Those are bad quality, go to hobby store or ebay and get an aluminum or thick plastic horn

 

[upbasher1]

https://www.ebay.com/itm/Apex-RC-Pr...=32284742744138278da6c80c4629a106de79732ed42a

 

[Roost]

I have had bad experiences with aluminum horns wearing out the servo end. You could try adjusting the servo saver also.

 

[guinnessdublin]

Aluminium servo horn every time for me, that plastic rubbish is just waiting to break! ?

 

[Habiak]

Thanks 🙂

 

[reddragon]

I'm curious, has anyone used a servo saver or do they just use the aluminum/plastic arms?

 

[X]

I'm curious, has anyone used a servo saver or do they just use the aluminum/plastic arms?

A servo saver on the servo would be redundant with the servo saver/ bell crank setup that is factory installed on newer Savages.

 

[olds97_lss]

I always had good luck with dubro heavy duty servo arms.
https://www.amazon.com/Strength-Standard-Hobbies-Hobbico-Command/dp/B0006MZR5A

 

[reddragon]

A servo saver on the servo would be redundant with the servo saver/ bell crank setup that is factory installed on newer Savages.

Understood! Thanks Very Much.