savage 25 won't start

[61impalaron]

My Savage 25 was running fine. Switched it over from 27 MHz to 2.4ghz and everything works fine. Glow plug is fine,new fuel and batteries and igniter works fine. Turns over fine but won't even try to fire up. Haven't touch any carb settings. Anybody have any thoughts what might be wrong?

 

[Jam Racing 1]

maybe your idle gap changed some in the switch over. I would recheck everything and try again.....

 

[61impalaron]

maybe your idle gap changed some in the switch over. I would recheck everything and try again.....

I was just setting here thinking about that. Will take air filter off in the morning and see what's happening.Thanks

 

[timatworksg]

That and the New Transmitter trims. Make sure they are at neutral position or zeroed. Also I would re-center the servos by removing the servo arms, turning everything on and replacing the arms back. Sometimes different transmitters make servos center differently....to my experience lol.