wildchild27
DR. DISASTER
- Messages
- 748
- Location
- Etna Green, IN
ok ive thought of some tips for a nitro engine after its been sitting for any period of time.
some of the things you might need and to check.
1. wd40 or aro (after run oil).
2. check glow plug and replace if needed.
3. charge glow igniter and replace reciever batteries or charge battery pack.
4. check all screws and tighten any that are loose. (any screws that go into metal ALWAYS use lock tight)
5. check fuel lines for cracks holes and gummed up fuel that could be in them and replace as needed.
6. after you have checked your kit over and are satisfied with what you have checked put some fuel in it and have fun!!!!
some of the things you might need and to check.
1. wd40 or aro (after run oil).
2. check glow plug and replace if needed.
3. charge glow igniter and replace reciever batteries or charge battery pack.
4. check all screws and tighten any that are loose. (any screws that go into metal ALWAYS use lock tight)
5. check fuel lines for cracks holes and gummed up fuel that could be in them and replace as needed.
6. after you have checked your kit over and are satisfied with what you have checked put some fuel in it and have fun!!!!
