Post your tire and rim setup pics

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
0312161646.jpg 0312161646a.jpg Thought I would post up my newest setup, some 40 series proline volosity wheels with proline bowties mounted on them. I came across these at a swap meet and had to grab them up.
 
I know it's not a savage, but odds are after running them a bit more this season, I'll get a second (and possibly 3rd) set for my Savage and other Revo, Sweep Racing tires/wheels mounted:
2016-0310-SRCTiresWheels-Revo01.jpg


Compared to traxxas geode wheels and traxxas 3.3 tires:
2016-0310-SRCTiresWheels-FaceCompare.jpg

2016-0310-SRCTiresWheels-SideCompare.jpg
 
Mashers rock lol going out to bash them in the am they look monster truck cool why no 1459653953120-761640663.jpg
 
I have these IMEX Jumbo Maxx tires I took off another truck I bought. They are way offset but gives me stability and major grip in the dirt. They are the ones in my profile picture. I'm going to try ProLine Big Joes, next. I still have the stock wheels with the Terrapin tires but man, they seem so unstable compared these.
 

Attachments

  • Tires.JPG
    Tires.JPG
    250.3 KB · Views: 4
Red cat avalanche rubber and rims on my x, running rich for break in. Not quite a gallon yet.. check out oil residue on back rim..lol20170702_092257.jpg
 
Last edited:
Since my last posted pics are gone, here's some new ones. Runnin Pro-line Badlands on Blue groove dual offset rims. The rims can be taken off and spinned 180° and ran without an offset. Unfortunately, these rims are obsolete. 20180518_205547.jpg 20180518_205645.jpg 20180518_205726.jpg
 
Imexx jumbo Kong’s and Proline weld racing Cheyenne’s
 

Attachments

  • 81EDA067-3516-45FB-B22E-E35C085E11B3.jpeg
    81EDA067-3516-45FB-B22E-E35C085E11B3.jpeg
    237.9 KB · Views: 10
  • 14243701-2ACA-45E2-A9F0-AB161DACC3C2.jpeg
    14243701-2ACA-45E2-A9F0-AB161DACC3C2.jpeg
    302.8 KB · Views: 9
Proline badlands MX3.8 with proline wheels.
 

Attachments

  • 20180903_212406.jpg
    20180903_212406.jpg
    252.9 KB · Views: 9
Ofna 3.2 dish wheels with Losi Ramminator tires
 

Attachments

  • 20180903_212533.jpg
    20180903_212533.jpg
    286.3 KB · Views: 5
RPM 3.2 wheels and HPI Super Mudders Tires
 

Attachments

  • 20180903_212605.jpg
    20180903_212605.jpg
    275.2 KB · Views: 6
This was my 1st savage...... well my 1st nitro really. Has proline weld Cheyenne’s (non bead lock) with losi ATX tires and proline tech 5 and big joes (least favorite of the wheels!
 

Attachments

  • A78B7747-1543-4FC3-9D6E-5C5CB5285542.jpeg
    A78B7747-1543-4FC3-9D6E-5C5CB5285542.jpeg
    272.9 KB · Views: 11
  • 1F58BA16-B798-4050-B34D-BCC6693865B7.jpeg
    1F58BA16-B798-4050-B34D-BCC6693865B7.jpeg
    340.6 KB · Views: 11
Got a set of the tall trenchers on my flux. I really like the cushion they add to the landings.
2018-0311-SavageFlux-MambaMonsterX-MotorESCInTruck01.jpg
Question on your wheelie bar, saw one like that on ebay for $20 or so, but the picture made it seem like it just came with the bar and wheels attached, did yours come as just that or was it with the wave looking mount? Also how do you like it? Better than HPIs single wheel?
 
Question on your wheelie bar, saw one like that on ebay for $20 or so, but the picture made it seem like it just came with the bar and wheels attached, did yours come as just that or was it with the wave looking mount? Also how do you like it? Better than HPIs single wheel?
It's a 2 piece combo. You have to buy the bumper and wheelie bar, then assemble it. I like it a lot better than the stock one. It really helps the rear of the body not catch the grass and get destroyed in 2 minutes when you wheelie. I have the same setup on my X and FluxHP.

I did run a piece of cable through it around the stock bumper/skid so if it caught the ground when carthweeling, it's less likely it would catch and get pealed off the truck as the only thing holding it on are the 4 screws on the bottom.
 
Hear is what I have been running for years, Maximizer Beadlocks and HPI GT M/T tires . Love the Beadlock , Hate the Glue.
Apparently Maximizer is No More.
Paddles are from Panther ,for Dunes/ Glamis

SAVAGE FLUX BODY-1.JPG
20181001_160515[1].jpg
 
Last edited:
Proline trenchers on desperados 1/2 in offset on my xl.
 

Attachments

  • 5809F7EE-210A-46B5-B7A4-1FC6F4A0048C.jpeg
    5809F7EE-210A-46B5-B7A4-1FC6F4A0048C.jpeg
    351.5 KB · Views: 21

Latest posts

Members online

Back
Top