New Axial .32

[THE PIPER]

So after a contacting Axial time after time about my Axial .32 being to hot they finally emailed me back. I was told to turn the LSN from factory settings 1.5 turns and my temps are Excellent now. I have 3/4 gallon through it and let me say Axial made me a believer now. I though I had a air leak some where but I couldn't find it. I guess it was the LSN, now that everthing is in place with the ''BUKU''!!! this thing FLIES!! With the buku I used the heavyest spring (red) largest cone no ring and tuned the buku 2.5 turns and there is no way I could keep it on the ground IT WAS SICK!! I'm so impressed with the Axial I was going to break my new LRP in on sunday but now I'm going to sell it for 100$ J/K I'm going to hold off breaking it in till next spring I'm going to have way to much fun with this.. So the bottom line is I recommend the Axial 32 to anyone that wants some CRAZY bottom end. Great job Axial! Cheers!!:beer:

 

[AoD]

Great piper! That's great hearing that you got some good help with it! Seeing a nice motor run is awesome! That's one motor that I've been looking at as a replacement for my stock F4.6 🙂

 

[backwoodboys11]

well i have the axial .28 and love it.my opionin is axial are great motors.my next buy will be the .32
let us know how it does at full throttle

 

[Crash]

PIPer, what gearing are you useing?

 

[THE PIPER]

PIPer, what gearing are you useing?

Hey Crash, 17/47 I was thinking 15/47. 17/47 seems great but I guess if you run a hight tork mill the gearing should be tuned for it. What gearing should I use? Cheers!!:cheers:

 

[Crash]

just curious

but, 17/47 will suit you better than the 15/47(too low)

you may like a 18 /47 evan more than the 17/47

 

[THE PIPER]

well i have the axial .28 and love it.my opionin is axial are great motors.my next buy will be the .32
let us know how it does at full throttle

I'm going to try to set the Buku today for racing. I got my new burnell radar that I haven't tryed yet. gun I'll let you know the top end later today Cheers!!:cheers:

 

[THE PIPER]

just curious

but, 17/47 will suit you better than the 15/47(too low)

you may like a 18 /47 evan more than the 17/47

Got ya, think I'll improve the top end and still keep the hard tork with 18/47?

 

[backwoodboys11]

with my 28 using a 17 or 18 c/b it will flip over anytime in 1st gear and in 2nd it will tote both frony tires with a 47 spur

 

[oregonmud]

Glad to her you got some help out of Axial. I have had great luck with them and the 1 time I had an issue they resolved it very fast. Even better to hear your engine is running better for you. I would think 18/47 would be fine with the .32. I'm running 17/47 on my basher with the .28 and it has plenty of low end torque still.

 

[THE PIPER]

So I got the wife and kids out on Sunday and the new Bushnell radar gun. I got the wife to hold it making my runs and it held steady at 51mph that with the Axial .32 and BUKU set for racing (Red spring,large cone,no rings, finded tuned at 3 turns) The gun hold true and it affordable. The great thing about it is the tuning part especially for the buku tuning. U can see the increase or decrease in power I recommend the Bushnell radar gun Cheers!:cheers:

 

[Jeremy]

what cb/sg you running .. what clutch also ?

 

[THE PIPER]

I hey Jester I have the hpi purple alloy shoes and I'm running 17/47 Cheers!:cheers:

 

[backwoodboys11]

glad to hear now we need video

 

[THE PIPER]

Guys I marked that at MPH that was to be KPH we go KPH here my mistake
(51kph) sorry guys

 

[homeydclown]

I think you might be quite impressed when you fire up that lrp also....I got a 17/47 setup and cannot keep this thing on the ground and the top end is fantastic.Hope ya have lots of luck with the axial I have heard they are pretty reliable.

Peace all🙂