JVT73
Well-Known Member
- Messages
- 289
- Location
- Pennsylvania
Well, I finally had some time to install the Motor Saver air filter that I won in the contest and install a Savox 1256 TG stearing servo. The servo install took some time, I made a few dremel mods to the radio box to allow for the servo to sit properly with out stressing the wires and utilize the center servo port to keep the wires in. I can't stand a birds nest of wires so I figured I'd route the servo wires through the empty center port. Enjoy the pic's & thanks again HPISF for the air filter. @WoodiE , @Jam Racing 1, @X. Oh, and that servo is sweet @277 oz. in. It has no trouble turning the tires. Unlike the stock SF20 that couldn't turn the tires when the truck was not moving.