Lost My Carb Bolt

[MikeK1981]

So I was out running my cousin's budget truck today with my motor in it (k5.9) and the cinch bolt that hold the carb in came out. Can you guys direct me to where I can get just that part? I need the bolt, and whatever plastic piece that used to go in there with it.

 

[ljrce]

part number 15231
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJYU5&P=7
according to hpis manual for the 5.9
http://www.hpiracing.com/graphics/instr/engines/15250.pdf

 

[Londoner]

I remember when I stripped and cleaned my K4.6 I dropped that screw and lost it, I just used an M3x16 countersunk screw and it worked fine, in fact I think ti was the exact screw.

The screws that go into the diff cups are the same thread and should work too if you got any knocking around spare, phillips head I know but they would suffice.

But if you wanna buy the whole kit then this is the cheapest I can find.

http://cgi.ebay.co.uk/HPI-15231-Car...Control_Parts_Accessories?hash=item5d24a26e05

 

[Londoner]

So I was out running my cousin's budget truck today with my motor in it (k5.9) and the cinch bolt that hold the carb in came out. Can you guys direct me to where I can get just that part? I need the bolt, and whatever plastic piece that used to go in there with it.

I remember when I stripped and cleaned my K4.6 I dropped that screw and lost it, I just used an M3x16 countersunk hex head screw and it worked fine, in fact I think it was the exact same screw.

The screws that go into the diff cups are the same thread and should work too if you got any knocking around spare, phillips head I know but they would suffice.

But if you wanna buy the whole kit then this is the cheapest I can find.

http://cgi.ebay.co.uk/HPI-15231-Car...Control_Parts_Accessories?hash=item5d24a26e05

I really should have read properly, you do need the whole kit, dunno how I missed that lol

:istupid: :duh:

 

[MikeK1981]

Thanks guys, I also saved the PDF for the k5.9 manual since there seems to be some part numbers in there that aren't in the XL manual. Ordered two from the LHS.