BIG DADDY 808
Well-Known Member
- Messages
- 286
- Location
- BIG ISLAND,HAWAII
hey bro's,made a throttle servo mount for my sons build,due to still being unemployed, its has to be a low budget build and had to use what i had laying around it's gonna be mid- tanked, so i needed to move the throttle/brake servo to the rear next to the mill.
here goes:
Started by making a cardboard template and a piece of aluminum plate.
[/IMG]
[/IMG]
and after some cutting,filing and bending :axed: and drilling this is what i came up with.
[/IMG]
[/IMG]
And its gonna be mounted something like this..And no,not with blue masking tape. lol,gonna drill a couple of small holes with small nuts and bolts and with a lot of clearance for the mill and linkage.
[/IMG]
[/IMG]
what it's gonna look like with the servo in there,fits nice..:rock:
[/IMG]
[/IMG]
[/IMG]
thats all folks! Aloha and thanks for looking. :rock1:
here goes:
Started by making a cardboard template and a piece of aluminum plate.
and after some cutting,filing and bending :axed: and drilling this is what i came up with.
And its gonna be mounted something like this..And no,not with blue masking tape. lol,gonna drill a couple of small holes with small nuts and bolts and with a lot of clearance for the mill and linkage.
what it's gonna look like with the servo in there,fits nice..:rock:
thats all folks! Aloha and thanks for looking. :rock1: