Help! Truck wont stay running

[Swerve12]

Hey everyone, I have looked all over the forum for a solution to my problem but i cant find one, so i decided to ask. Whenever i start the truck and pull it full throttle it stalls out and if i do get it to full throttle and let off the gas and/or use the brake it stalls. i Have a savage 25. Anyone can help that would be great thanks.

 

[wildchild27]

its one of 2 things it could be either really rich or lean. go back to stock settings and re-tune till you find the sweet spot. also re adjust your idle screw after you get it tuned to the way you like it.

and check your glow plug as it could become fouled and not lighting the fuel causing it to be rich

 

[Swerve12]

thanks alot ill try that

 

[maximusraylius]

hello welcome to the forum... i agree with eric (wild child) start out with stock settings all needles set to flush.. then start by turning the hsn.high speed needle turn it in 1/8 in turns ..sounds to leabn but could be dead plug getting fouled out..chang plug retune.. good luck..

 

[Swerve12]

thanks yea i just went and got a new plug gonna try it this after noon