Fuel Brand/Type ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Lexpert81

Active Member
Messages
75
Location
Brookfield WI
I am brand new at this and just got a savage x 4.6 used. It is supposed to be broken in with about 3/4 of a gallon of fuel i don't know what type. But I was wondering if I should do the breakin again or just start rippin. Also what brand and nitro content would you rec ? Should i run a med glow plug ?

Thanks
 
Got it used and don't really know how breakin went or what fuel was used Thats why i was wondering if it was at all a good idea to do the breakin over
 
Racers usually use 30% Most bashers use 20% There is a difference in power an temp but the real difference IMO is the price. Its all about what people prefer.
 
30% will have more power and runs cooler. 30% over 20% is usually about $3 or so higher per gallon.

Some will say 30% is harder on the motor.

FYI: Typically if you run a higher nitro content you want to go to a colder plug. So like 30% use Medium to cold plugs and with 20% use a Hot to Medium Plug.
 
Nitro is a "super charger" the Nitro actually delivers more Oxygen to the mill than it can suck thew its carb alone.

I am also a byrons gen 2 fan. Have also run all 20, 25, and 30
 
i run sidwinder 20% i am new it used to run on blue thunder stay away did not run right allway chasing the tune
 

Latest posts

Members online

No members online now.
Back
Top