f4.6 pullstarter?

[ishkive2]

well today i took out my savvy and when i went to start it up the roto start was just spinning freely and not turning over the engine... from what i understand i belive i broke the owb in the backplate... so does anyone know where i can get a pull starter for the f4.6 mill?... I'm just sick of that clumsy roto start... i can find the pull start for the k 4.6 but not the f series... is there a difference in the back plate between the 2 engines?... thanx

 

[Larsenracing]

I believe this is the one: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDLN5&P=ML

 

[AllanQ]

The p/s in the link larsen posted will work. The difference is the K has an internal OWB and the F has an external.

 

[Bankrupter]

Yep +1 on Allan and Larson

OFNA force mills .21 threw .32 all use the same pullstart. you can get it branded either way HPI or OFNA same mill same part.

 

[Mickey]

i have a pullstart and a good one way that will fit your f4.6 i just grenaded my mill so i wont need it. shoot me a pm

 

[ishkive2]

ok thanx for the help everyone... i ended up just taking the pull starter off of my hpi 21bb and the owb too... seems to work great

 

[AllanQ]

good to hear and glad you got it fixed.