carb probs

[savagerob]

hi all, just replaced the mid range needle on my k4.6 and it just wont run right!!!!!!!!!!!! al set back to flush and tried to tune but wont rev as high any more... any help greatly appriciated, thanks

 

[angellewalsh]

i have the same problem.evryone says set to flush mine bogs like hell if i go flush.your splutter is to rich try going 1/8 turn lean thats what I'm trying i guess sooner or later we will get it or blow the mill up

 

[canucksavage]

sounds rich to me. try flush on mid and leave it. concentrate on tuning your high speed first then your low speed may need a little tweek.

 

[savagerob]

Took head off today and coloring suggests far too rich
And had air leak issues on pull start end.
All sealed up and new bush fitted in back plate,
Will post results asap, cheers