Breakin bench (easy build)

[Purenitro]

This is a vid of a breakin bench that I put together for running in new engines. The main reason for this was to move the prop away from the engine as when they bite, they bite hard lol. The other reason was I don't like side loading a brand new bearing with a prop pulling on it, this design iliminates any side loading and acts just like it were mounted in a truck with a spur gear and clutch bell. The engine in the vid is a modded K 4.6

http://s99.photobucket.com/albums/l291/purenitro/?action=view&current=BreakinBench.flv

 

[Grumpy1822]

You need to hook a r/x to it so you can sit and drink beer while breaking in the engine.

 

[Crash]

nice..........

 

[Bankrupter]

That's very nice indeed!

 

[scrogathon]

Ive never seen it done like this before, have you ran that engine in a truck yet? Nice job on the bench.

 

[Purenitro]

That engine went to Australia after the bench. The guy races an extended savage, he wins most all the races he enters in, second place is usualy a lap or two behind him in a field of 15-20 trucks (revo's too) lol.

 

[Purenitro]

Here is a vid of a modded axial .28 RR and my K 4.6 The first 1:45 is my buddy just breaking in the RR at the track, after that we are at a football field pulling wheelies, it's the only vid of my K. I'm the blue truggy.

http://video.google.ca/videoplay?docid=-3776074000149711705

 

[scrogathon]

LOL nice wheelie at the end of that video, long time ago I had this video on my psp and was showing all my freinds what modded engines are like.

 

[Jeremy]

That is sweet !

 

[chrisw]

u do some great work

 

[Bankrupter]

Here is a vid of a modded axial .28 RR and my K 4.6 The first 1:45 is my buddy just breaking in the RR at the track, after that we are at a football field pulling wheelies, it's the only vid of my K. I'm the blue truggy.

http://video.google.ca/videoplay?docid=-3776074000149711705

I have a K4.6 HO Id love to see done. If you wish to do so. Pm me a price if you do. Also would you prefer a new sleeve or a gallon or so run and what % fuel you recommend running with your work. I am a die hard Byron's gen two fan. Prefer 25 % but that does not matter.:resp: It could be done at your leisure of course. LMK ~Justin~

 

[Purenitro]

I have a K4.6 HO Id love to see done. If you wish to do so. Pm me a price if you do. Also would you prefer a new sleeve or a gallon or so run and what % fuel you recommend running with your work. I am a die hard Byron's gen two fan. Prefer 25 % but that does not matter.:resp: It could be done at your leisure of course. LMK ~Justin~

PM sent. 🙂