mikemikek129
New Member
- Messages
- 2
added 3 speed gears to a 2 speed transmission case! That was first mistake! so can any one give me some advise on how to get the transmassion to shift from 1st to 2nd, so i think i'm in 1st or maybe starting in 2nd if that is possable? on that note! I have pulled apart a total of 3 times to adjusted 2nd clutch. 1st time disassembled, lift clutches with no adjustments (right out of box).2nd disassembled adjusted clutch 2nd gear 2 & 1/2 turns 3rd gear 3 turns, 3rd disassembled adjusted 2nd clutch 3 turns, 3rd gear 6 turns so it will not ingage 3rd gear so i don't get any more fustrated! if some one could give me some of their fustrated experiences with this issue i would be greatly thanked! NOTE: I'm working with a OS .30 VG with a werks clutch, 14/50 bell,steel gear with no slipper pad,stock tires,RD logics pipe ,blue thunder 30% fuel.
thanks for input.
mikemikek129
thanks for input.
mikemikek129