Search results

  1. Y

    Brake issue with XL, brake rod pulls out of tranny

    So what do u do if the holes are stripped? I'm having a problem with mine coming loose always. I just took out the screw, put jb weld on the threads and screwed em back in .
  2. Y

    Brake screws coming loose.

    The two screws that hold your pads and shoes on always come loose and make me have no brakes. What i did is took the screws out, put jb weld on the threads and screwed that back in.Let it dry overnite. Anyone ever have this problem before, and if so how did u fix?
  3. Y

    Best place to get engine temp is??

    I know most take it from the top down to the plug but the other day I tried it juust under the cooling head on the side of the crankcase and it was always 10-20 degrees hotter. Whats more accurate or best to go by?
  4. Y

    LRP .28 one way bearing failure

    Ya seems to work better
  5. Y

    Ribbed pipe for lrp z.28 s3

    I'm using the hpi ribbed pipe for this mill and it's pretty crazy!! My bro has the polished pipe on his 4.6 and I was thinkin of tryin it on my lrp. Anyone ever use the ribbed pipe forthe lrp? Ihear it likes a restricted pipe. I can't really see a diffrent pipe making more noticable power for...
  6. Y

    After run oil??

    I'm using sidewinder 30% and it says not to. Is this true?
  7. Y

    LRP .28 one way bearing failure

    Ok I just soaked my owb and shaft in alcohol and dried them the best I could. All I had was 70% isopropl alcohol. Is that ok?
  8. Y

    LRP .28 one way bearing failure

    I'm kinda havin the same prob. My pullstart detracts but wen I pull it over it only actually turns the mill over Inc and then the rest of the line is slack. I tookoff the backplate, took out the owb and starter shaft and cleaned them cuz they were full of oil and itkeeps slipping. Should I soak...
  9. Y

    Pullstart problem

    I took off the pullstart and backplate. Soo oily in there. So I cleaned the owb, starter shaft and inside the pullstart. Seems to be better now. Only thing is wen I was cleaning the pullstart, the spring came out and everything. Got it wound back and it's working, just a cm of string is left...
  10. Y

    Pullstart problem

    I'm using sidewinder 30%
  11. Y

    Pullstart problem

    I'm breaking in my new motor. Today I'd fired it up and drove for awhile. Then tried to start it again but the pullstart seemed like it was slipping. It would turn itover once then all slack after that. I took off the pullstart and it seems fine. It's the lrp 28 pullstart version.
  12. Y

    which mill?

    Not bad. My friend has an axial .28r, alright for the money, still can't keep up with me and I'm running 17/52 combo.
  13. Y

    which mill?

    I don't drag, I'm just saying, buddy is askin which to buy, I'm saying lrp is fast, powerful and better than axial. I had a axial.32 and wouldent come close to my lrp.
  14. Y

    Lrp z.28r s3 break in, how many tanks?

    Also my bro has my temp gun so iv been goin without one. Just been breaking in by the sound, feel and smoke.
  15. Y

    Lrp z.28r s3 break in, how many tanks?

    Thanks guys. I'm gona continue tomorow breaking It in. I'm using sidewinder 30%.
  16. Y

    Lrp z.28r s3 break in, how many tanks?

    Cool , ya I haven't even cracked it full throttle yet. Can't even really get there yet anyway due to being soo rich right now. Ill take it slow, I only turned the hsn a tad cuz it was just too rich, maybe 16th of a turn in. It's got power and lots of torque now, can't imagine in another gallon...
  17. Y

    Lrp z.28r s3 break in, how many tanks?

    Started breaking in my lrp. In the book it says only 4 tanks break in. If ran so far 7 tanks and haven't really opened it up with higher rpm's. What do u all say, take it easy for a few more tanks or is she good to go?
  18. Y

    which mill?

    Lrp z.28r spec 3 all the way. I will spank any savage with a axial in it!!
  19. Y

    LRP Break In Question

    Sorry I was looking at the .28 break in
  20. Y

    LRP Break In Question

    2.75 turns? In the manual it actually says 3.75 turns.
Back
Top