Should i use 2 servo savers or 1 is ok

[AtaNaS]

Hello people,
I have a question about the servo savers in my savage.

I have the stock servo saver that adjusts onto the steering servo
and then i bought the following:

http://www.rcxshop.com/product_info.php?cPath=23_61&products_id=1435

At the moment i'm using both of them,
do i need to remove one or its ok using them both?

Thanx in advance.

 

[Jeremy]

Thoes are the same Part .. The one that came stock on the truck is the same as what you just bought.. you can't use to servo savers .. I don;t think anyway

 

[AtaNaS]

uh i forgot to mention... i have a savage 25... the saver in the link
is from the XL.
The stock saver from 25 is adjusted right onto the servo.

 

[SnowAVman]

It will work fine when the truck is rolling, but at low speeds or stopped the wheels may not turn left or right.

 

[AtaNaS]

It will work fine when the truck is rolling, but at low speeds or stopped the wheels may not turn left or right.

so what are you suggesting? remove the stock one and leave the
new on it?

 

[RangerRock]

What servo are you using? Most servos such as 645mg and such under 200oz won't turn the tires from a stand still

 

[Jon]

i think you will only need the servo saver you just got, take the old one off and use a regular servo horn instead.

 

[AtaNaS]

Thanx all for your help i will try to remove the old one and see how it goes.