xll-SavageX-llx
★ CaNaDa Eh ★
- Messages
- 1,480
- Location
- Hamilton Ontario
Well after the long wait for my parts from Tower Hobbies they finally came today =)
I'm still out on the FLM servo mounts, trying to find a place that shipping is lower then $20 HAHA
- Items & Part #'s -
• Duratrax 3mm O-Rings x10 - DTXC4208
• Hobbico 6" Futaba Extension - HCAM2000
• HPI Engine Mount Braces - 86068
• Traxxas Receiver Box Slash - TRA5624
• Integy Blue Antenna Mount - T3883BLUE
• OFNA CNC Aluminum Servo Horn - 10731
• OFNA Fuel Line Clips - 10270
• OFNA Fuel Line 2" - 10177
• OFNA 1/7 Scale 250cc Fuel Tank - 10504
• OFNA Posts & Spacers - 30287
• OFNA Linkage Kit - 1023
• OFNA Linkage Sliders - 10702
Ok now for the build =)
Let the pictures explain the build...
• Parts From Tower Hobbies -
• FREE Stickers =) -
• Tare Down -
• Tare Down -
• Tank Plate Mock Up -
• Tank & Posts (REAR VIEW) -
• Tank ( SIDE VIEW) -
• Tank (FRONT VIEW) -
• OFNA Servo Horn w/ 25T Adapter -
• OFNA Servo Horn w/ stock TH Servo -
• Card Board Mock Up Template -
• Tank Plate (FRONT VIEW) Sketchy But Works -
• Tank Plate (REAR VIEW) -
• Traxxas Rx Box w/ Futaba Receiver -
• OFNA Spacers came in handy =) -
• Traced & Cut Out ON/OFF switch -
• Traxxas Rx box w/ HPI switch -
• REALLY TIGHT FIT -
• Drilled Out 2 TVP's holes to 3mm for the RX Box-
• Traxxas Rx Box mounted to FLM TVP's -
That's it for now still waiting on the OFNA Linkage Sliders and FLM servo mounts.. The only two things that holding me back =(
Well it mite be a few weeks till i update this thread so, stay tuned =)
Thanks
- Brandon
I'm still out on the FLM servo mounts, trying to find a place that shipping is lower then $20 HAHA
- Items & Part #'s -
• Duratrax 3mm O-Rings x10 - DTXC4208
• Hobbico 6" Futaba Extension - HCAM2000
• HPI Engine Mount Braces - 86068
• Traxxas Receiver Box Slash - TRA5624
• Integy Blue Antenna Mount - T3883BLUE
• OFNA CNC Aluminum Servo Horn - 10731
• OFNA Fuel Line Clips - 10270
• OFNA Fuel Line 2" - 10177
• OFNA 1/7 Scale 250cc Fuel Tank - 10504
• OFNA Posts & Spacers - 30287
• OFNA Linkage Kit - 1023
• OFNA Linkage Sliders - 10702
Ok now for the build =)
Let the pictures explain the build...
• Parts From Tower Hobbies -
• FREE Stickers =) -
• Tare Down -
• Tare Down -
• Tank Plate Mock Up -
• Tank & Posts (REAR VIEW) -
• Tank ( SIDE VIEW) -
• Tank (FRONT VIEW) -
• OFNA Servo Horn w/ 25T Adapter -
• OFNA Servo Horn w/ stock TH Servo -
• Card Board Mock Up Template -
• Tank Plate (FRONT VIEW) Sketchy But Works -
• Tank Plate (REAR VIEW) -
• Traxxas Rx Box w/ Futaba Receiver -
• OFNA Spacers came in handy =) -
• Traced & Cut Out ON/OFF switch -
• Traxxas Rx box w/ HPI switch -
• REALLY TIGHT FIT -
• Drilled Out 2 TVP's holes to 3mm for the RX Box-
• Traxxas Rx Box mounted to FLM TVP's -
That's it for now still waiting on the OFNA Linkage Sliders and FLM servo mounts.. The only two things that holding me back =(
Well it mite be a few weeks till i update this thread so, stay tuned =)
Thanks
- Brandon