scorpio1026
Member
- Messages
- 11
As far as going into castle link, I have version 1.24. Should I update to the latest one before beta? I believe its 1.26 according to the CC website. Looks like I can't update it when in Castle link since it shows no available firmware Anyway I have the Flux 2350 and need some suggestions on what settings I should have. Here is what I have now.
Auto LiPo at 3.2 volts per cell.
Brake 40%
0% drag brake
0% punch control
50% reverse throttle
BEC @ 5.5v
Start Power Low
Motor timing Low(5)
throttle deadband average.1000ms
Please suggest anything I should change. Oh and doing mostly bashing on all surfaces.
Auto LiPo at 3.2 volts per cell.
Brake 40%
0% drag brake
0% punch control
50% reverse throttle
BEC @ 5.5v
Start Power Low
Motor timing Low(5)
throttle deadband average.1000ms
Please suggest anything I should change. Oh and doing mostly bashing on all surfaces.