Whats your settings like?

[scorpio1026]

As far as going into castle link, I have version 1.24. Should I update to the latest one before beta? I believe its 1.26 according to the CC website. Looks like I can't update it when in Castle link since it shows no available firmware Anyway I have the Flux 2350 and need some suggestions on what settings I should have. Here is what I have now.

Auto LiPo at 3.2 volts per cell.
Brake 40%
0% drag brake
0% punch control
50% reverse throttle
BEC @ 5.5v
Start Power Low
Motor timing Low(5)
throttle deadband average.1000ms

Please suggest anything I should change. Oh and doing mostly bashing on all surfaces.

 

[Slimshamis]

I would set your motor timing to zero and move your LiPo cutoff to at least 3.7

 

[Preacher_Ed]

Slimshamis, I'm watching this thread and I'm learning the Castlelink. Could you explain your suggestions, so that I can further my grasp on the Castlelink settings?

 

[maximusraylius]

this thread is as forign to me as the pigmies down in affrica lol but it should be a great thread to help other members out that do electric and are new to it ll... good stuff guys ..