what gearing?

[Bill2032]

ok so i have chosen my engine i am getting the axial .32 Spec 1 but don't know what gearing to get for low end speed any help much appreciated

 

[Crash]

search the Gears/Clutches/Brakes section.

 

[Bill2032]

i know I'm sorry i keep on putting threads in the wrong section

 

[ntenc1]

The Axial .32 is all bottom end! That means you should direct yourself to the top end of the spectrum! Use a tall gear 18t/47t or taller. It will fall flat on it's face at top end. It will not hang with the RR IMHO! It will possibly take it out of the whole (depending on setup). The RR will walk all over the .32 mid and top.

 

[Bill2032]

i do not know which one i am looking for an engine with grunt (power) but as well as speed but do not want to spend too much money on a novarossi



:bluehack:

 

[Crash]

Bill a video is worth 10,000 words

http://www.youtube.com/watch?v=Fj8QUaIjGBU

 

[Trixter]

Dude that is a sick vid my axial28rr does the same plenty of power

 

[rex_hvn]

bill if you look around on this site using da search button i know dere is a jpg telling u gear ratios and wot they are good for
like a test try 2 find da pic
have fun

 

[Jeremy]

Dude that is a sick vid my axial28rr does the same plenty of power

Lets really confuse him
here is a link to my old sts .30 http://s144.photobucket.com/albums/r198/nw10er/?action=view&current=withoutbrakes3-11-07002.flv

 

[MotoPsycho]

Bill a video is worth 10,000 words

Was that vid shot across the street from a prison, or a mental institution?

 

[Bill2032]

ok so i have chosen the Axial .28RR Any idea where to get em from my LHS do not have them and what gearing shall i use for the Axial .28RR for low end speed

 

[Jeremy]

ok so i have chosen my engine i am getting the axial .32 Spec 1 but don't know what gearing to get for low end speed any help much appreciated

ok so i have chosen the Axial .28RR Any idea where to get em from my LHS do not have them and what gearing shall i use for the Axial .28RR for low end speed

Whats next??

 

[Crash]

HOW the Spur Gear and the Bell Gear work

You divide the spur gear, into the bell gear like this, 52 Divide by 13 = 4 turns for the Bell gear and 1 for the Spur

52/13= 4 Low End Power / Hill Climbing

52/15= 3.46

52/18= 2.88

49/13= 3.76

49/15= 3.26

49/18= 2.72

47/13= 3.61

47/15= 3.13

47/18= 2.61 Top End Power / SPEED

Robinson racing Comb 48/16 = 3

 

[rex_hvn]

here u go bill crash is right but this if probabally easier https://www.hpisavageforum.com/forums/showthread.php?t=3867

 

[Shaun]

Lets really confuse him
here is a link to my old sts .30 http://s144.photobucket.com/albums/r198/nw10er/?action=view&current=withoutbrakes3-11-07002.flv

now,now play nice S.J. LMAO