Suspention problems on the flux

[Travis Mowery]

I cannot get my flux dialed in.

I was talking to bank and i put together some hellfire shocks.
I took my big bores off my Flux and took the shaft out and replaced it with a hellfire shaft.

Should i use another shock tower besides the stock one?

I was thinking about using this shock tower

http://www.fastlanemachine.net/proddetail.php?prod=FLM43000&cat=22




What do yall think?

 

[Pope]

Looks good but do you really want to add all that weight? What is the problem you are having.

 

[Travis Mowery]

My suspention it wants to sag real low and i like to keep my dogbones flat. I'm running 45wt

 

[Pope]

Sounds like you need to preload your springs is all.

 

[frddyj]

i think baddasz_savage runs those towers & hellfire shocks. ask him.

 

[Pope]

Wait I read it as you have Hellfire shafts in big bore shock shafts. Is that Right? If you are running straight Hellfire shocks than yes you will need some sort of diffrent shock tower. PRC lcg shock towers should work too in that case.

 

[frddyj]

Wait I read it as you have Hellfire shafts in big bore shock shafts. Is that Right? If you are running straight Hellfire shocks than yes you will need some sort of diffrent shock tower. PRC lcg shock towers should work too in that case.

Thats is what he said alex, big bore shock bodies, hellfire shafts.

i have the same on my nitro with stocker HPI towers.

BA runs the complete Hellfire Shock with a tower similar to what you posted.

sorry if i made n e confusion.

 

[Travis Mowery]

Thanks guys i made a little ajustments ill run it and let yall know how i like it.