shock upgrade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
faisalbasha

faisalbasha

Mr Nonsensical
Messages
581
i got a crazy truck... i need stronger shocks to better handle the monster...

i got my eye on the HPI A712 shocks.... any suggestions....
 
I have those shocks on mine and to be honest I'm going to take them of and install the HPIA720 alum. "Big Bore" shocks. I feel 8 shocks is just to much even with lower shock oil. Truck tends to bounct to much.
 
Ok... That's good. I'm not familiar with these things. I'm thinking about getting them.. But still not sure/..
 
I'm running the plastic big bores from the flux and like them,and there a bit cheaper lol
 
Here is a thought. IRC savagev2 shocks.

savage-shocksV2-Black.jpg


http://www.innovative-rc.com/complete-innovative-black-anodized-savage-shocks-p-650.html
 
they look sick but I'm not paying $200 for some shocks.... id rather pay 100 and get the HPI A712 (8)... i get 8 of them too..... they do look crazy tho....
 
no doubt they are pricey. He stuff is very nice. Thought I'd toss other ideas out their.
 
faisal the a712s are basically aluminum bodied stock shocks. not much of an upgrade, and they bend shafts easier. i ran the plastic bigbores from the flux. if you scope out ebay for a deal a set can be had for around 40 bucks.
 
hey Mickey I have also ran the plastic "Big Bore" shocks and was wondering if the HPIA720 alum. "Big Bore" shocks are better? I have the 8 aluminum A712 shock and don't care for them they bounce to much.

Also was wondering if anyone has done or thought of putting the 5SC shocks on a Savage. Whats needed or are they to long?
 
8-shock-shaft-front.jpg



Savage & MCD Big Bore Shock Shaft for Innovative-RC Big Bore Baja shocks.
These are a direct replacement for Innovative-RC Savage Big Bore shocks made from high grade high tensile steel and hardend to an ideal state, with a ground round surface for a perfect sea - having a surface finish: Better than 0.6 microns (25 micro inch) for the best smooth operation of the shock shaft.
Included:-
1x 8mm replacement Shock Shaft for Savage & MCD shocks.
Size:8mm OD, 91mm Long
 
AERC78 said:
I have those shocks on mine and to be honest I'm going to take them of and install the HPIA720 alum. "Big Bore" shocks. I feel 8 shocks is just to much even with lower shock oil. Truck tends to bounct to much.
Click to expand...
After you switch to the big bore shocks do you know how to find the shotgun replacements? I can't find them anywhere not even plastic I'm trying to upgrade to aluminum but I can't find any that sit in the bottom cup correctly?? Please help me I can't bash till I get this fixed...
 
Hey there Mattsavage92 I ordered these shocks from rc4me for my Savage XL and they work great very pleased with them.

5mm Shaft Big Bore ALUMINUM SHOCK SET for HPI SAVAGE 4.6 5.9 FLUX (2pcs) SAV8001
 
My comment was supposed to say shaft end... Lol sorry.... The part that threads onto the shock shaft and goes into the a arm but I am going to check them out!! Ty very much for the help !
 
My original shocks have the like "ball" thing in the top but the ones I ordered do not?? What is that part called?? Also can I take them off my old shocks and put them in the new ones?? I was just going to swap the top but there threaded different....

17200283648245294219471701080408.webp

1720028390734221641049206848561.webp
 
I got them but the not bladder shocks.... They are emulsion shocks?? And every video I watch they talk about a bleeder screw and well I don't have one .... Any idea how to fill them with oil properly?
 
The end of it is the only thing that's not aluminum!... On the shocks I had and the new set I just bought... Which I don't understand....! I can't find them Anywhere.
 
You must log in or register to reply here.

Latest posts

Members online

No members online now.
Total: 323 (members: 0, guests: 323)
Back
Top