Paul Williams
Well-Known Member
- Messages
- 222
Whats the best and easiest way to get to the servo saver as never built a savage from scratch before its too loose.
Thanks.
Thanks.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The skid plate is removed by the 4 screws that go into the bulkhead, your picture is little help, maybe post an actual picture of your truck and the problem areaDo you go from the bottom taking the skid plate off?
Ive tried taking that off before and there is two screws that just go round and round and i cant get the plate off.
This is the part I'm trying to take off but as i say the screws just go round and round and nothing happens.
https://wheelspinmodels.co.uk/i/575...WF00XBRU4kuMjz5ppBAldvWE1geEIQiRoC86gQAvD_BwE
Fixed. Much better. As i say i had to hold the top screws still and that was it the plate came off and tightened it right up. Great
Thank you for your help Jam 1. I actually did it.The skid plate is removed by the 4 screws that go into the bulkhead, your picture is little help, maybe post an actual picture of your truck and the problem area
Welcome to HPISavageForum, a friendly forum to discuss the Savage RC Truck.
Your voice is missing! You will need to register to get access to the following site features:We hope to see you as a part of our community soon!