savage bevel gear bearing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Not sure what one your really talking about ..
But if it the one the pinion sits behind(13 thooth) it the same size as the wheel bearings? ether that or the other bearings are 10x16x5 mm thoes sit on the out drive cups.
 
well, i got those from tower hobbies

are those the right ones?? beside when i measure them it seems wrong to me

the inner are 10 while is hould be 8 as or am i wrong??
 
bin_dubai said:
well, i got those from tower hobbies

are those the right ones?? beside when i measure them it seems wrong to me

the inner are 10 while is hould be 8 as or am i wrong??
Click to expand...
those are for the diff itself. Pinion and wheel bearings are the same like jester said.
 
Last edited by a moderator:
i contacted tower hobbies regarding the wrong info on the tag with the different bearing inside, they told me its not worth to return them since am living overseas, they said they will refund me, beside the itnegy shocktower they mention that its for savage x while its for savage 21&25. so am getting both refunded

now i lost confindence to order from them, i am delayed to finish my savy, and i don't know what shock tower i would go for 🙁 🙁
 
the stock tower works fine for most shocks... unless you are going to a truggy /buggy shock the alloy towers are truly a bling part
 
bin_dubai said:
its the front bumper
Click to expand...

LOL cool. the bumper's mount to the skid plate and the supports go to the x tower. Now I am confused again ? what truck do you have? savage bumpers will not work no but the savage X bumper will. You lost me with the first question.
 
looks like the card on the top of your bearing package is the wrong one. It is the right description and part # but that is not what is in the bag for sure
 
BANKRUPTER said:
LOL cool. the bumper's mount to the skid plate and the supports go to the x tower. Now I am confused again ? what truck do you have? savage bumpers will not work no but the savage X bumper will. You lost me with the first question.
Click to expand...

well, i have savage X, but to hook the part which support the bmuper u need the showcktower hole to look it in, the shock tower dosent have it

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPUM5

with this u can see the there is holes only for the gear box to be attached to

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPZM6&P=7 while here u see the 2 large holes at the side of the shock tower, were the supports goes through
 
BANKRUPTER said:
looks like the card on the top of your bearing package is the wrong one. It is the right description and part # but that is not what is in the bag for sure
Click to expand...


yeah u r right, that what prevent me from ordering again, i would go for ebay this time and order from nitronutzz, it would be cheaper and less shipping cost

but i will be stuck with the showck tower, i need to find someone who can ship it to me 🙁
 
bin_dubai said:
well, i have savage X, but to hook the part which support the bmuper u need the showcktower hole to look it in, the shock tower dosent have it

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPUM5

with this u can see the there is holes only for the gear box to be attached to

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPZM6&P=7 while here u see the 2 large holes at the side of the shock tower, were the supports goes through
Click to expand...

The top one is for the S-25 the bumper support mounts to the front of the bulk head with them. The 2nd purple one is for the x supports the two outermost holes are for it.

But don't use integy alloy parts, bend like cheese... Anything but them bud!
 
Last edited by a moderator:
Anything thing else.... FLM, GH, And more...
Just keep the integy off the 8th scale bashers. They do have some good parts but most are not.
 
You must log in or register to reply here.

Latest posts

Members online

Total: 474 (members: 1, guests: 473)
Back
Top