Dooley
ERCM Pipe #29
- Messages
- 308
- Location
- Middletown, Indiana
With the parts I have laying around and the parts I picked up from HPISavage_25 I am on my way to Savy #2
Here is the base of the build.
FLM LCG TVP's
3 Speed Trans
HPI A720 Big Bores
49/17 spur/cb
Max Life clutch shoes
I got the front and rear assemblies from HPISavage_25 and they seem to be in decent shape.
Things I have on order.
Front/rear center dogbones
Brake kit
Throttle/Brake Linkage
Motor Plate and Mount
Hexhead screw kit
Things left to get.
Axial .28 spec 1s
Pilot Nut
Mugen 1.0 springs
Air Filter
Steering servo
RX to go with my MX-3 fhss
Hump Pack
I started mocking up some things to kinda see what I had and what I needed to day. Theres just a few big ticket items left like the RX and the mill other than that i think its just a few odds and ends.
Here it is as of now.
Here is the base of the build.
FLM LCG TVP's
3 Speed Trans
HPI A720 Big Bores
49/17 spur/cb
Max Life clutch shoes
I got the front and rear assemblies from HPISavage_25 and they seem to be in decent shape.
Things I have on order.
Front/rear center dogbones
Brake kit
Throttle/Brake Linkage
Motor Plate and Mount
Hexhead screw kit
Things left to get.
Axial .28 spec 1s
Pilot Nut
Mugen 1.0 springs
Air Filter
Steering servo
RX to go with my MX-3 fhss
Hump Pack
I started mocking up some things to kinda see what I had and what I needed to day. Theres just a few big ticket items left like the RX and the mill other than that i think its just a few odds and ends.
Here it is as of now.