Project: Bulletproof Basher

[arisking]

No problem man. Here you go, I'll give you pictures of the battery box, reveiver box, the tank and both servos:

-Josh-

 

[Jeremy]

Yeah thanks again for the comments guys. Yeah only like 3 screws have come out so far and the tires hum down the road. They're stockers so I don't care about if I wreck them. runoverbysavage I understood what you said in a later post. But I still don't think the stock drivetrain would hold up though. And I put it in there to be bulletproof.

-Josh-

It will hold up for awhile I still run the stock dogbones and cup joints along with the stock dif cups (with the 4 bevel gear) OOOHH yea I have my share of snaped dogbones I think i have snaped everyone at least once.. And lots of bevel gears But sence I shimmed the dif I haven't really haven't had a problem with them.. Also I Have a good tip for thoes people out there that have access to a welder (put a small tac weld on the dogbones({were they get smaller right before they start to go into the cup joints} I have done this and haven't had any snap so far.... I do plan on getting the alum.. dif cups and heavy duty dogbines and cup joints..sometime.........

 

[arisking]

Good idea I think I am going to get my dad to weld the dip and grind it to make it tougher.

-Josh-

 

[wardog]

crazy

need a list. i need to do that!!!!!!!!!!!

 

[Jeremy]

yes it works tac weld it on both sides and then grind it smooth (it doesnt have to be perfectly smooth u do want some of that metal on there

 

[Chaos]

Very nice truck Bro...i like the fact you also use the silicone dip,as you can see in my sig we canadians like to bash in what ever weather we get.

-Joe

 

[arisking]

need a list. i need to do that!!!!!!!!!!!

You need a list of all the parts? Do you have an E-Mail address I can send them to?

Thanks for the comments guys.

-Josh-

 

[wardog]

e mail address

hey josh. this is my e mail [email protected] thanks!!!

 

[arisking]

No problem man, glad to help out.

-Josh-

 

[arisking]

Okay guys sometihng finally came in the mail today, my 3-Speed and my CNR Dual Disk Brakes:

-Josh-

 

[k0m0d067]

those look SWEET!!!

 

[arisking]

Thanks man.

Okay guys finally my ignitor and 18T vented CB also came in today along with my LST Shocks!!! Here are a couple pics of the shocks and stuff you might not have seen:

-Josh-

 

[Mondragon]

looks nice man great job on it.

 

[samisavage]

Nice truck josh. I've got nowhere near that much work into mine I just repair,destroy, repeat. Looks good.

 

[arisking]

Thanks for the comments guys. Me and my friends will be starting a video soon and will be finished in a couple months as we want it to be good. Hopefully our camera man holds through!!!

-Josh-

 

[arisking]

Here are some long awiated updated pictures.

Yes those are ghost flames.

Then it changed up a bit:

After I got my STS D30M Rev 2 P+P:

Couple days ago:

0702 Pipe:

Tank and mounts:

Talk about barely any clearance for the horn and cup:

Radio box setup (sorry it's a bit messy):

Enjoy!!!

-Josh-