prepping an engine before breakin.

[4x4]

New Engine Prep Guide Part 1

New Engine Prep Guide Part 2

New Engine Prep Guide Part 3

4x4

 

[Fx]

Thanks I'm adding it to the list now. I hope you don't mind that I edited it a tad. If you don't like what I did just change it back to how you had it. Thanks a lot 4x4, I gave you some rep.

Note To All Members: Send me a PM when you find a "tutorial/how to" video or article (even if it's not yours) so I can have lots of info in one thread.

 

[4x4]

thanks fx the way you have edited it is great
thanks
4x4

 

[SAVDOG]

Thanks For The Vid 4x4. They Are Helpful.

 

[4x4]

your welcome ive posted some more to fx so there should be some more on the forum soon.
4x4

 

[super nub i drive traxxas]

in that video it says wen geting a new engine u should tear it down
i just ordered a 0s 30 do i neeed 2 do that?

 

[Jeremy]

Moved thread to engine section
Thanks for the find

 

[4x4]

in that video it says wen geting a new engine u should tear it down
i just ordered a 0s 30 do i neeed 2 do that?

you don't have to but if you know what you are doing then i think you should.
if you are not sure what to do then don't do it as you could damage your engine more than the little metal fileings in it. with the last engine i had i didnt seal it and that still lasted a while. so i would recomend it but don't go breaking your engine. as i said earlier if you are not sure what to do then don't do it

hope this helps
4x4