-
Ask questions. Share your HPI Savage knowledge. Register TODAY!
power
- Thread starter svdude
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
ShiftPoint
Well-Known Member
- Messages
- 840
- Location
- Ft. Laduredale, FL
I think something is wrong there because if you look at the spec's on this servo here http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHZR9&P=7
it is 24kg-cm or 333oz-inch so I would think that 48kg would be more like the devils servo at 666oz-in.
I am pretty sure your talking about a large servo, to large for the stock postion I made the same mistake a week or so ago, still I haven't seen one with that much torque and I think the mosst powerful one for the size that fit in the stock steering location is a Jr brand at 403 oz-in. I am still not sure if that is 403 per square inch or what??
what servo are you talking about. I can tell you I just put one of the 333oz ones in my truck and it rocks. Honestly though while driving it I don't see a big difference between it and the 645mg I had in there before.
it is 24kg-cm or 333oz-inch so I would think that 48kg would be more like the devils servo at 666oz-in.
I am pretty sure your talking about a large servo, to large for the stock postion I made the same mistake a week or so ago, still I haven't seen one with that much torque and I think the mosst powerful one for the size that fit in the stock steering location is a Jr brand at 403 oz-in. I am still not sure if that is 403 per square inch or what??
what servo are you talking about. I can tell you I just put one of the 333oz ones in my truck and it rocks. Honestly though while driving it I don't see a big difference between it and the 645mg I had in there before.
ShiftPoint
Well-Known Member
- Messages
- 840
- Location
- Ft. Laduredale, FL
well you can get the 333 oz hitec I linked for well I got mine for like $84 dollars but I have been told you can find them on ebay for as low as $75 dollars. I honestly don't think you will feel the difference between the 400 oz and the 333 oz, plus the hitec is digital and programmable (if you ever get or know someone with the programmer (it is linked on the page I linked) it is also coreless which is nice, very very smooth and has Titanium gear so it is a bit lighter. its probably the best servo you can get in that size. check the SMF store I think they are around 89 dollars there if there are not any on ebay.
I should say again, I really don't see much difference while driving my truck between the 130 oz 645 and the 333 one, now sitting still there is a big difference, I have one truch that is heavy and has 7" x 4" tires on it the 654 wouldnt turn the wheels at all sitting still the 3330z does without any problem what so ever.
I guess what I am saying is if I had it to do over I don't think I would buy them again, I thoink I would go with the 180 oz servo but I don't remember the part number, some are getting them for like 35 dollars from nitronutzz on ebay (have to mention Crash and HPISF, he might have or be able to get the other hi torque servs we are talking about at a good price too.
Last edited by a moderator:
