Oregonmuds racer

[oregonmud]

Those are Traxxas throttle linkage slides and stops. There is an OFNA throttle linkage kit that has the same type of pieces and some other parts you can use too. Some clevices, a 6" rod, a spring from a ball point pen, ball ends and turnbuckle from a RS4 and your almost there. Just have to put it all together.

 

[GeorgesBlazah]

Cool, I might go pick that up later so I have it.

 

[GeorgesBlazah]

Back again wiht more questions. My center skid hits the tranny/brake. Did you have this problem?

 

[oregonmud]

I haven't been able to mount my center skid plate yet. I have the old style FLM TVPs and the new skid plate. They wont work together without being modified. So do you mean the actual skid plate is touching or the Skid plate brace is touching?

 

[GeorgesBlazah]

the acual skid plate is touching....I think I'm just gonna grind it down or space the plate down some.

 

[oregonmud]

Thats a good idea to space the plate down some. Just put a washer in between each brace and the skid plate and that will give you more clearance. Good luck with that, it sounds like you are on the right path.

 

[Memnoch]

The Skid plate on mine has a Groove In it to keep the Disk Brake and Transmission from touching it.

 

[GeorgesBlazah]

The Skid plate on mine has a Groove In it to keep the Disk Brake and Transmission from touching it.

I have the groove too